Let's study floats for long casting

Consider the floats for long casting and studytheir features and differences. Match tackle is significantly different from other designs. The main purpose of the long rigging of the rod is long-distance casting with the utmost precision. The match float looks rather cumbersome. Low sensitivity of the float does not prevent him from showing bites, even on the contrary, a long antenna, which occupies most of the body of the float, will help the fisherman not oversleep the sweep. This article will deal directly with such floats.

Antenna of float

As it was said before, this tackle hasantenna of distinctive dimensions. This is a feature of match gear. The long antenna, due to its weight, contributes to long casting. It should also be noted that such a tackle has tremendous stability, which gives it a long float antenna.

Appearance of the match float is similar to the cylinder.Its thickness varies in the region of 3-6 mm, and its length is 20-40 cm. Due to such dimensions, very high aerodynamics have been achieved. Among other things, such an antenna serves as a good stabilizer, which makes it possible to cast a required distance. A sliding float for long-distance casting is suitable, but it is best to use a match float, as the greater depth requires sufficient stability of the float.

The sub float must not be too heavy:if only the antenna will stick out of the water, then the bite can not be noticed. Floating tackle for long casting can be painted by a fisherman in a bright color, which will improve the bite alarm.

Floats for long casting have the necessaryaerodynamic characteristics, although their body is not much different from the rest of the floats. Often an internal load is used, which allows the center of gravity to be brought closer to the lower end. The body of the match float should be moderately wide and fairly long - this is probably the most important condition for such a high aerodynamics.

It is the load that allows you to divide the floats into several types:

• The main cargo is located on the line.This serves to work at great depths. Such floats for long-distance casting must have a sufficient external load. Otherwise, when casting, the tackle will take a long time to reach its working position.
• Hard fixation of external and internal loading. Such floats have a relatively low price and popularity. Are intended for catching in certain places.
• Unstable external and internal loading.Such tackle provides for the presence of a cavity inside the float, which holds the sinker. The lower part of the keel is unscrewed, the load is added or retracted. It is also possible to use interchangeable washers. Such tackle is quite universal, due to which and enjoys high popularity among fishermen.

Floats for long casting are mainly made from balsa. It is necessary to protect his body from damage, otherwise water will be drawn into it, which will lead to nothing good. Good luck in fishing!