If you can make a mini tractor frommotoblock, then you can in a short time and with a minimum of effort to process small tracts of land. You will not be able to buy a factory model by force for every consumer, so you can improvise.
If you found an old motoblock in the barn, thencan be converted into a small tractor. Yes, and the purchase of a new motoblock will be cheaper than buying a full-fledged tractor. The technology of carrying out the work is not difficult, but for carrying out manipulations it is necessary to familiarize yourself with the methodology.
Not every motoblock is suitable for alteration, thisthe technique must meet certain criteria, otherwise the tractor will not perform its basic functions. Specialists recommend paying attention to the following characteristics:
As for the first feature, it shouldbe greater. In this case, it will be possible to process an impressive area. It is important to pay attention also to the type of fuel. It is better to prefer a model that operates on a diesel engine. Such engines are able to handle large areas. In addition, this technique economically consumes fuel, if you compare with gasoline analogues.
Making a minitractor from a motor block, it is importanttake into account also the mass. When the truck is purchased as a separate agricultural equipment, you should choose models with a low weight, this is due to their easy handling. However, in the case described, it is recommended to give preference to massive structures, since the homemade mini-tractor must process the soil. And if the device is easy, it will not cope with solid soil.
If you decide to make a mini tractor frommotoblock, it is important to take into account also the cost of the original equipment, it should not be too high, otherwise it will not be possible to save. Do not immediately acquire a popular model of the famous brand. In some cases, experts recommend giving preference to domestic producers. As practice shows, for the manufacture of a mini-tractor, the following motor blocks are perfectly suited:
To these models, you can purchase a ready-made conversion kit, in which case the work will be completed in a short time.
If you decide to make a mini tractor frommotoblock, you should consider all of the above models, but the "Agro" option has some design flaws, consisting in low fracture toughness. This defect in the work of the motor block is not reflected. But if you convert it into a mini tractor, then the load on the semi-axle will increase. Therefore, it will be necessary to strengthen the problem node.
You can perform this work using the installation methodwheel gearboxes. All of the above models are well proven in the processing of soil. If a breakdown occurs, there should be no problems with the spare parts.
When the home craftsmen make a minitractorwith their own hands from the motoblock, they quite often prefer the "Centaur" model. This agricultural equipment belongs to the class of professional equipment, which indicates a high performance of the device.
As a key node in this casestands the engine, whose power is 9 liters. from. For the conversion of the motoblock into the tractor it will be necessary to make the frame using a metal profile. In addition, you will need to install a seat and a pair of wheels. This mini-tractor with his own hands from the motor block can be equipped with a trailer for the transport of small-sized cargo. In addition, you can use a blade and a single-blade plow.
If you are thinking about the question of howmotoblock make a mini tractor, then as an example you can consider the model "Zubr". As in the above-described case, this device has a good power plant, it functions at the expense of diesel fuel. For the manufacture of a mini-tractor it is necessary to prepare:
As for hydraulics, it will be required to operate the device in conjunction with attachments. Additional wheels can be borrowed from a car.
Before you make a mini tractor from a motor block,you can try to find the model "Agro". In this case, the approach will be more serious. It will be necessary to strengthen the leading semi-axle and wheel gears. As an option of manufacturing it is possible to locate the engine from behind, it will allow to distribute load as much as possible evenly.
To convert a motoblock into a mini tractor is possible bytechnology, which is the same for all models. As an exception, a tractor manufactured on the basis of MTZ stands out. Before starting work, tools and parts should be prepared.
For convenience, it is recommended to purchase a kit for converting a motor block into a mini tractor. Such a purchase will cost the consumer 30,000 rubles. When preparing the instrument, you need to stock up:
For frame manufacturing it is necessary to supplementbearing structure, because you will need to install two more wheels. For this, pipes or metal corners are used. The cross section does not play a special role, the main thing is that the frame can withstand the load. The conversion of the tiller to the minitractor at this stage involves cutting and fastening the blanks together. To increase the reliability of the structure, a transverse beam must be installed.
When converting a motor block into a minitractorit is recommended to install an attachment on the frame for the work with additional equipment at the first stage. The hitch can be locked in the back or front of the frame.
