Today, not everyone can install in an apartment ora private house a two-circuit boiler or a heating tank, but you can use all the advantages of hot water in a different way. To do this, there is a water heater flowing electric. This is a very compact device, which does not require a lot of space in small bathrooms. Also this device will not spoil the interior.
With the help of these devices it is possible without anyproblems to use hot water in the period when it is not supplied. Do not have to change habits and suffer. Today such equipment is produced by a lot of different companies. How to choose a suitable heater, what are they, who makes them? Read all about this further.
Water heaters of flow type representa special flask, where the heater is located. Also, except for the heater, the device is equipped with an automation and control system. The startup process occurs when the user opens the tap. The power of the heating element is very high, therefore the flowing water is heated almost immediately. As for the temperature, it depends on the pressure head.
If you need very high temperature water, thenthe jet is reduced. If the tap is closed completely, the device will automatically turn off. Despite the rather compact dimensions, the heater has sufficient power.
As a heating element, in addition to TETA, uninsulated spirals or gas burners can be installed in similar devices.
All flow-through heating devices for water,which are offered to the modern consumer, can easily be divided according to the design features on the flowing water heater electric pressure or non-pressure. The difference between them in their capabilities. Thus, a non-pressure model can be installed only on one water intake point, while pressure equipment easily supplies heated water to several such points.
This equipment is most often installed incity apartments. The power of the heaters can vary from 3 to 8 kW. The devices from ordinary sockets are fed. During installation, the system is connected to a cold water pipe or directly to a mixer. Non-pressure solutions have only one crane.
Some manufacturers produce heaters that are equipped with a nozzle-shower. Also in the kit there can be other details.
This equipment for household usehas a large capacity, and also differs in the way of connection. If in the case of a non-pressure solution it was sufficient to fix it on the mixer, then it is necessary to install it in the water supply system.
Pressure flowing water heater electriccan simultaneously serve several consumers. The water will be equally hot at all points. With such a device, it's difficult to notice that summer and hot water are not supplied on the street, and the presence of such a heater will be felt at prices in the electricity bill.
The appliance can not be plugged into a household outlet. It is connected only to a three-phase network. Such networks are in the apartments, where an electric stove is installed instead of a gas stove.
The speed with which the water will be heated depends on how much power this or that water heater has on the flowing electric one. Capacity also depends on capacity.
In this case, do not choose the most powerfuldevice - you need to focus on the electrical power of the house. Often, the wiring power in the apartment is not higher than 12 kW, and on the market you can find heaters with a power above 27 kW.
For an ordinary city apartment will be quiteenough features that the water heater provides up to 8 kW. Naturally, the appliance can not cope with the filling of the bath, however it will be possible to take a shower or wash the dishes.
For those who want to receive immediately and all and notrepresents life without a hot bath every day, it is better to buy a water heater flowing electric, whose characteristics are from the power of 13 kW.
The amount of water required depends on the amountresidents of the apartment. Selecting the device, you should focus on the necessary amount of water, which can provide this or that device. No less important is the parameter, such as performance.
This characteristic is measured in liters per minute andalways indicate in the documents to the device. Modern flow-through heaters with an average output of 3 to 8 kW have capacities from 2 to 6 l / min. This volume (6 liters) will be heated in 20 seconds.
If the water heater is a flow-throughelectric has a low power, then install it directly at the point of water intake. It is important to find the right and proper place for the device. With this there will be no problems. Modern manufacturers make compact devices that do not take up much space. But there are quite large products. So, the average size is 150x300 mm.
Pay attention to the equipment, the body of which is made of plastic, metal or both.
Choosing among some models, it is worthwhile to drawspecial attention to the availability of a management system. It can be either electronic or hydraulic. On more modern and technologically advanced models, the front part of the case is necessarily equipped with various adjustments. When installing a water heater, a flowing electric electric heater, the photo of which can be seen in the article, note that the temperature regulator should be available. To save energy, manufacturers have provided several modes.
Since this is an electrical appliance, safe operation is an important parameter. Any modern water heater is equipped with various sensors. If any of them works, the heater will immediately turn off.
In order to avoid any problems during use, the device is equipped with thin filters and a non-return valve. The magnetic starter allows the heater to be switched on / off automatically.
Choosing quality equipment, it should bepay attention to AB Electrolux. The flow-through pressure electric water heater of this manufacturer is an intelligent device in which there are all necessary adjustments for comfortable use.
