Open joint stock company "KAMAZ" isone of the largest truck manufacturers in the CIS. This enterprise is engaged in the production of truck tractors, airborne and thermal vans, as well as dump trucks. Agriculture, construction, municipal service - these are the main industries where KAMAZ truck is used. The body volume at the same time can hold from 8 to 26 tons of loose materials (depending on the model). Let's look at the characteristics of these trucks on the example of models 55111 and 6540.
Technical characteristics and body volume of KAMAZ truck of model 55111
To date, this dumper model isone of the most used in the agricultural industry. Its main advantages are low cost, build quality and reliability of the engine. And everything began in the distant 1988 year, when the Kama plant decided to update its line of dump trucks. It came to replace the old ten-ton model 5511. The novelty was equipped with a new cabin, distinguished by its height and rectangular headlights, built into the bumper. Unlike the 250th KRAZA, the cabin of the novelty was metal. She did not have a sleeping place (it would never have been useful at the construction site). The salon accommodated the driver and one passenger. Comfortable steps provide fast and safe entrance to the salon. The design of the new KAMAZ had some similarities with the 15-ton dumper 65115. Their main differences are the load-carrying capacity and fuel consumption. The body is made of all-metal steel. Looking at its shape, you can immediately see an additional visor over the cabin (an additional security measure). According to the reviews, the body is convenient because its side can be increased, thereby increasing the "cubature".
The total volume of the KAMAZ truck body is withoutThe additional sides were 6.6 cubic meters. With the "accreted" sides, the useful volume increased to 10-13 cubic meters. But this does not mean that the load capacity of the truck will also increase. Many drivers forget about it and load up to 15 tons of sand or rubble into the machine. From such an overload, wheels can burst. Unloading of loose materials is carried out with the help of a three-stage hydraulic cylinder, which is activated through the power take-off. The machine has a trailing device, due to which KAMAZ will transport 2 times more crushed stone and sand in the road train.
Technical characteristics and volume of the KAMAZ body of the 6540 dumper
This four-axle model is the most enormous,volume and load-lifting among all other dump trucks. The truck is equipped with a KAMAZ 750-360 engine with a power of 360 horsepower. Due to this unit, it is capable of pulling loads up to 20 tons inclusive. And thanks to high ground clearance, it easily copes with mounds, pits and other irregularities. There are two mechanical gearboxes - nine and ten steps. There is also a 16-speed ZF box. The total volume of the KAMAZ body of the 6540 dump truck is 20 cubic meters. Like the 55111, the four-axle truck has a trailing device, due to which it is possible to increase the load-carrying capacity by about 1.5 times.
