The wireless network has long been a familiar thing.for many owners of computers and laptops. It is easy and convenient to use. Internet access can be obtained anywhere in an apartment or office, but at the same time kilometers of wires will not be underfoot. You can get access to the Internet not only from a laptop, but also from a tablet or smartphone.
However, most users do not know howsolve even the simple problems associated with the router, and does not understand how to turn on the wireless connection on the laptop. When access to the Network is lost, you do not need to immediately call the technical support of the provider. First you need to figure out what caused the Internet to turn off: a computer or service provider.
Before you panic and call the wizards, you must first make sure that the problem cannot be fixed manually, and also figure out what caused the malfunction — a laptop or router.
The first step: reboot the router.It is necessary to turn off the power of the gadget, wait twenty seconds and reconnect it to the network. After that, the router will reboot, and, possibly, access to the Internet will be restored.
If this does not help, then you should not immediately resetrouter settings. First you need to pull out the Internet cable from the device and directly connect it to the laptop. If you have access to the web - the problem is in the router, and then you can try to reset the settings and calibrate the gadget. And only when all of the above did not work, you need to contact the provider.
But there is another reason for which the Internet can be lost - the software of a computer or laptop.
To understand how to turn on the wireless connection on a laptop and immediately access the Internet, you need to follow a few simple steps.
In order to install or update the driverwireless network, you need to know the exact model of the laptop or computer. You can install the driver from the boot disk, which comes bundled with the computer, or download from the Internet.
Download driver is quite simple.First you need to go to the official website of the manufacturer of the laptop. Next you need to find the driver on the site. It is enough to enter the device model in the search bar, and the service will show all available materials. Usually the name of the driver for Wi-Fi contains the following combination of words: Wireless Network Adapter.
After a successful download, you must install the driver and restart the laptop or computer. If after that the Network has not recovered, then you should contact the provider.
Some users do not know what to do ifwireless is off. How to enable Wi-Fi on a laptop in such cases is not clear. It is worth noting that not all laptops and computers automatically search for an access point immediately after switching on.
Некоторые модели снабжены специальным A switch that controls the on and off of the Wi-Fi receiver. In other models, a special program developed for a specific version of the laptop may be responsible for this.
In order not to experience problems with how to turn on the wireless connection on a laptop, the user should find out how Wi-Fi is activated on a personal computer: hardware or software.
But how to enable wireless on a laptop HP, Lenovo or Asus hardware? The user will be presented with three ways:
The slider to turn on Wi-Fi most oftenUsed in older notebook models. To switch on, it is necessary to carefully inspect the body of the device and find the slider, then transfer it to the active position.
Sometimes the Wi-Fi adapter is turned on via a button. In such cases, near the keyboard there is a button with an antenna - a sign of the wireless network.
Owning a more modern gadget is easy to understand how to turn on the wireless connection on the laptop Acer, Asus and HP. Activation takes place using the Fn and F1-12 key combination.
In some models, for example MSI GT780, a touch panel is located above the keyboard, which allows you to turn on or turn off the wireless network with one touch.
There are cases when the Wi-Fi receiver is turned offprogrammatically and activate it using a button or keyboard shortcut is impossible. How to enable wireless on a laptop (Lenovo, Asus or Acer - not so important) in such cases?
The user will need to right-click.click on the "Network" icon on the taskbar. Next, select the "Network Control Center" from the list. In the window that opens, go to the page where you can change the adapter settings. Select the wireless network from the list and turn it on.
The connection will change its color from gray to color, and after a while it will be connected to the Internet.
You can programmatically activate the network adapter through the Device Manager. As a rule, such outages rarely occur, mainly during failures in the operating system.
To enable a Wi-Fi adapter via the “Device Manager”, you must:
Thus, you can enable the wireless network in hardware or software.
