Error STOP:0x0000007E, unfortunately, is observed in almost all operating systems of this family. It really is. Crash STOP: 0x0000007E Windows XP issued the first, and then off we go. But each user asks the question about what it is connected with, because, it would seem, only recently the whole system worked flawlessly, and here it is ...
This failure, as a rule, is initially difficult to classify, since there can be many reasons for its occurrence, and they all differ among themselves.
However, if you mark the result, herepresents the appearance of a blue screen either at the stage of system boot (which indicates a “gathering” of the video driver, or in an already loaded system, when the performance of system processes for some reason becomes impossible). Although the notification itself has a direct hint at the BIOS, sometimes the reason may be not at all.
Usually as the root cause ofSuch a problem many indicate incorrect operation of the graphics accelerator. On the one hand, such an assertion holds. But the failure with the STOP code: 0x0000007E is not always associated with this, since there are more simple and more complex situations.
Чего только стоит отсутствие места на жестком drive? No matter how trite it may sound, the system is simply unable to start and execute some internal processes. And this is not talking about possible damage to system files or related dynamic libraries. And if you dig into the settings of an outdated BIOS firmware, then in general, what is called, you can break your leg.
But we got a little distracted.The first way to eliminate a stop code failure STOP: 0x0000007E, of course, will be the removal of unnecessary information. Usually, user files, unlike programs, take up little space, so they, by and large, you can not touch.
The whole point of cleaning comes down to cleaningsystem services and their traces of activity. You can, of course, use the optimizer utilities, but, as a rule, you will not get the most effective impact. This is only due to the fact that programs of this type do not interfere with the residual components of the installation of the system itself or its updates, although they can remove incorrect entries from the system registry or clean computer garbage.
Therefore, use first needbuilt-in tool of any Windows system, which is invoked via the context menu with the choice of a string of properties of a disk or partition with a transition to the service tab. Here you can clean up the disk, noting at the same time and cache, and updates, and temporary files, and a whole bunch. It is believed that the simplest cleaning of disk space eliminates the problem with the STOP code: 0x0000007E often enough (of course, if not this is not associated with damage to the components of the system itself).
As is already clear, the blue screen STOP: 0x0000007E may appear in other cases. A very likely cause may be the absence or damage of system files and libraries.
What works in the loaded system throughsafe mode that when starting from removable media in the form of an optical disk or flash drive, you need to use the command line launch to check the main contents of the OS directory: sfc / scannow. The verification process can take a lot of time, but will have to be patient.
Another reason for the appearance of such an error is the drivers, and, more often it concerns the video card.
Устраняется данная проблема обычным обновлением drivers (button on the tab of the same name in the properties menu). If this is not some non-standard hardware, the driver will be automatically installed upon reboot. In extreme cases, it can be installed from the disk that is to be supplied in the kit, or by downloading software from the manufacturer's website with the input of the DEV and VEN code from the hardware ID section.
If you are too lazy to do such things, you can install programs like Slim Drivers or Driver Booster, which automatically install or update the drivers for you.
Finally, the most embarrassing situation can bethat the primary system itself does not properly respond to the "iron". This can happen only due to the fact that the components installed on the motherboard, even if supported by the BIOS, are more modern than there is support.
В этом случае не остается ничего другого, кроме flashing BIOS. In the case of a modern UEFI system of labor, this does not amount to - just run the executable file. But in the old BIOS you will have to work hard (especially if there is no update point as such in the system itself). And at the same time you need to be very attentive, otherwise you can make something that later the whole system, as they say, “will fly”. Improper firmware, improper installation, interruptions in electricity in the process of flashing - this is not a complete list of all that can cause a system crash. Then, not only the OS, but when the computer is turned on, no action will stop responding.
Based on the above reasons for the emergence of suchkind of error, and even with a blue screen, it can be noted that many are beginning to just panic. And in vain! This error, by and large, with the equipment is connected, as they say, insofar as. In other words, it relates to the hardware only in terms of its control programs (drivers and related software), nothing more. The main emphasis in correcting such a situation concerns mainly and exclusively program direction. And do not forget about the free space on the "screw". Elementary cleaning of the system partition from the accumulated debris, especially with the deletion of files of the previous system or the same updates, will affect the entire system so favorably that you cannot even imagine.
If, however, give some advice in the end, the sequence of actions may look like this:
Примечание:If the sfc / scannow command does not give the result, you can install or use the portable version of the DLL Suite package, which repairs or loads damaged or missing dynamic libraries.
