Everyone who uses a computer,sooner or later will face a problem when the keyboard gets clogged and because of this it will not work properly. Of course, this is inevitable, since every person likes to drink tea near a computer or is there while watching a favorite TV show. Crumbs, spilled liquid are very detrimental to the operation of the keyboard.
If you use the keyboard for a long time, and itshe began to get upset, then, most likely, she was clogged and it's time to clean it. A professional for his work will take about 300 rubles, but you can not fork out, and clean it yourself. Many people, when they start cleaning the keyboard, are asked the question: "How to remove the buttons from the keyboard?" Let's look at this.
If the cause of clogging are crumbs, thenit will be necessary to remove the buttons and clean them from debris. First, make sure that the keyboard is disconnected from the computer. Also, you should take a few photos of your keyboard, so that later there are no problems with the layout of the keys, so as not to confuse them with places.
How to remove buttons from the keyboard?We take the knife and gently pry the keys on the keyboard. You need to act slowly so as not to break the mount. It is better to hold the button with your hand so that it does not fly away. After removing one button, you will understand how best to proceed. This process requires a person to be careful not to harm the keyboard. Also need to have at least an hour of free time.
After removing all the buttons you can vacuum allclean. Next, wipe the surface with a damp cloth. So you still get rid of the dust. After you have completed all the steps, you can proceed with the assembly. To do this, put the button in its place, so that it is in the groove, and press. As soon as you hear a click, you can release the button. To avoid confusion, use the photo you took before disassembling the keyboard. Once you collect it, you can start using it.
If you spilled tea or coffee on the keyboard, thenshould be approached to clean more carefully. In this case, you must immediately disconnect the keyboard from the computer and drain all liquid. Next, you need to disassemble the keyboard. So, remove the buttons and soak them in plain water to remove the remaining sticky liquid. And the place where the buttons stood, should be thoroughly wiped with a damp cloth. If you are sure that the liquid did not get inside the keyboard, then you can start assembling.
Perhaps, after the assembly of the keyboard, somekeys began to stick, then you need to continue cleaning. To do this, turn the keyboard and unscrew the screws. Carefully separate the top and bottom parts. Of course, there is no 100% certainty that you will be able to fix the keyboard, but it's worth a try. Do not completely disassemble. You need to gently wipe with a damp napkin place where there could be liquid. After that, it is better to assemble the keyboard and test its performance.
The keyboard in the laptop can also become dirty andstart to stick. How to clean it of garbage? Also it is necessary to remove the buttons and use a vacuum cleaner to remove all debris. In a laptop, shooting buttons will be a little more difficult. How is it shown? Let's look at how to remove buttons from the keyboard.
Also take the knife and gently push the button.It should rise at the very tip of the knife. After clicking, you can be sure that it jumped out of the latch. Unfortunately, it all just seems simple. In fact, you need to carefully study how to remove the buttons from the keyboard. After removal, we clean from debris and dust.
After cleaning, you must put the keys in place. There are 2 latches on which it is necessary to get accurately. We put the button and press, after the click release. We'll do it with all the buttons.
On a laptop keyboard is quite difficultrecover from spilled liquid. As soon as such an incident occurred, you need to turn off the laptop and drain all liquid. Next it's better to take the computer to a professional, since an inexperienced person can only damage the laptop.
