TP-Link TL WR741ND: Configuring the Router

The times when the whole family used onecomputer, remained in the distant past. Currently, most people have different gadgets that have the ability to connect to the Internet via Wi-Fi. In order to provide a home wireless connection, you must install a router. Such a network device allows you to create an access point and use the Internet without restrictions.

Most buyers prefercompany TP-Link. And this is completely justified. For example, the TL WR741ND supports all modern technologies. The data transfer rate is 150 megabits per second. In work this device has proved itself only from the good side. However, some users have a question: "How to configure a network device?". The answer to this question can be found in this article.

Select a location

In order to avoid problems with speeddata transfer, you must start the TL WR741ND setting from the location selection. In this issue, there are certain rules. As you know, the signal of the Internet is significantly weakened if there are concrete partitions between the rooms. The instructions to the router indicate that the optimal location of the device is the center of the building or apartment. If you follow these recommendations, you will be able to cover the entire area with a wireless network. It would be superfluous to foresee the location of the outlet, since this model of the router is powered by an electrical system. And one more important point is the cable provider. Naturally, he must get to the device.

First connection

Before you configure the TP-Link of this model,you must connect it correctly. To do this, you need a router, a desktop computer or a laptop. At the beginning of the action, it is desirable that all devices are turned off. Now you need to collect all the components of the router. First of all, fix the antenna.

The cable that comes with thenetwork device, has a power adapter on one side, and a plug on the other. The latter must be inserted into the socket with a round hole. It is located on the back of the case. The power adapter is plugged into the power outlet.

For the provider's cable there is a specialport. In this model it is blue. Under it there is a marking WAN. To connect the router, the cable must be inserted into this port. A wired connection, for example, with a computer or laptop, is created by means of a twisted pair. There are four yellow ports for this. They are signed as a LAN with a serial number from 1 to 4.

After all the abovethe TL WR741ND connection action, the router is configured via a PC. To do this, you must turn on the device. The power button is on the back of the router. When you press it from the front side, the indicators light up that indicate the operating condition. Naturally, the computer should also be turned on.

TP-Link TL WR741ND: Configuring the Router

Having checked once again the correct connection of the network device, you can proceed to the program configuration of the router. To do this, you need to do the following:

• Run any Internet browser on the computer.
• Enter the numeric code in the address bar. In the factory configuration (if no user changes were made) this is 192.168.0.1. Then press Enter.
• A pop-up window will appear on the screen.It is proposed to enter a login and password. The default is admin. Filling both lines, confirm the action by clicking on the Ok button. How to configure TP-Link if the password or login is not recognized? In this case, you must reset the settings to factory settings.
• If everything is entered correctly, beforethe user opens the router menu. On the left side there will be subpoints. They need to find the "Quick Setup" tab. In the pop-up window, confirm the action and click "Next".
• In the menu where you need to enter the IP address, subnet mask and other parameters, you must select "Auto Detect". Then continue the setting by clicking on the word "Next".
• If for some reason automaticthe definition of all the necessary parameters has not occurred, you will need to enter them manually. This information is provided by the provider. As a rule, it is prescribed in the contract. If you do not have one, you need to call the Internet service provider and find out everything you need.
• After these settings, the router will prompt you to createwireless connection. To do this, enter the network name, select the encryption method, and set the password. The user leaves the other parameters unchanged.

The setup process has come to an end.Now you need to click on the "Finish" button. After that, the network device will reboot immediately for the new settings to take effect. This completes the TL WR741ND setting. Now you need to test the wireless connection.

Wireless Internet. How to connect to a Wi-Fi network?

By creating a home wireless network, you can connect to it from any mobile device equipped with a Wi-Fi module. To do this, you need to do the following:

• On a smartphone or tablet, start the search for wireless networks.
• After all available Wi-Fi connections appear on the screen, select the required one.
• The device will prompt you for the password that is stored in the router settings. If you dial it without errors, the connection will be established.

In order to check the status of the wireless connection, it is enough to use any browser or mail client. If the user has access to them, then everything is configured correctly.

Finally

All TP-Link routers are different from competitorssimple setup. This model was no exception. From the foregoing information, the conclusion suggests itself: even an inexperienced user can cope with these actions. And if for some reason you need to return the factory settings, then this will not cause any difficulties. The question is quite reasonable: "What is necessary for this?". Resetting the TL WR741ND settings is extremely easy. Developers have two ways: through the menu and using the button on the casing (Reset). In the first case, you need to select a tab and activate the reset process, in the second - hold down the key for a few seconds and wait for the device to reboot.