The heating cable "DEVI" is used forprotection of pipelines from freezing, freezing of ice and snow on roofs, gutters and gutters. In addition, it is used to maintain the required temperature in hot water systems, technical installations, as well as to create a system of warm floors in living quarters. The main feature of such products is the ability to self-regulate the temperature, that is, the heat transfer decreases or increases depending on their heating.
Through the entire length of the cable between the parallelconductors (copper) is the temperature-dependent composition of the resistance - carbon polymer. When the product is connected to a 220 volt network, the current passing through the coal composition heats it. As a result, the polymer expands, and the distance between the coal particles increases, and this leads to an increase in resistance. As a result, the current decreases and the heating (power) decreases. The principle of self-regulation has been built on this principle. The heating cable "DEVI" is also interesting in that the heating control takes place separately over its entire length, taking into account the ambient temperature in each section. If the external temperature increases, the power released by the cable will decrease. Due to the described effect, the heating cable "DEVI" is protected from overheating of individual sections where the temperature is higher. Due to the parallel connection of the supply voltage, it is possible to shorten it anywhere. This greatly facilitates installation and design. When calculating the use of such cables, it is necessary to observe the maximum power parameters for different temperature regimes.
Используя саморегулирующиеся нагревательные cables together with the specified hardware and software complex, you will be able to fully control the heating in your home. Thanks to such a device, it is possible to control system settings and temperature regulators that operate on the network using a conventional personal computer. Thus, it is possible to set the temperature regime of the floor separately for each room, install heating of the roof and drainage channels, protect from freezing water and heating pipes. All information about each such object will be delivered to your computer.
Such a hardware and software complex will be veryconvenient and for workers who carry out installation work on installing self-regulating heating cables. The device will be able to detect system malfunctions.
This network connected system reads andanalyzes information from thermostats for several days. This allows you to determine the features of the operating mode of the system being tested and make a temporary heating map. Thus, you can choose the most economical power consumption for this object.
Use of a product such as heatingcable "DEVI", together with software and hardware complex "DEVICOM PC PRO" provides efficient heating in the apartment, house, office, in the industrial workshop, gym. Installing such a system is easy on any object, wherever comfortable heat is required. These complexes can be mounted both in new buildings, and at repair of old housing.