The conversion of motor blocks is most often done forIn order to create a machine resembling a mini-tractor. This allows you to optimize the process of processing the land and accelerate the speed of various operations, along with their expansion. In addition, this solution allows you to save money, as buying a factory model will cost an order of magnitude more.
If you are planning to pre-alter the motoblocks, then before buying a car you need to consider a number of factors:
Among the domestic units for transformation and improvement are the following brands of motor blocks:
For the conversion of the motor blocks of these brands, it is not difficult to find ready-made kits that allow the unit to be quickly and efficiently converted into a small tractor.
Among these species, only Agro machineryhas some design flaws. The main one is the low strength of the axis on the fracture. On the functionality of the motoblock, this parameter is not reflected, but when you convert it into a mini tractor yourself, this nuance causes an additional load on the connecting beam. In this connection, during the transformation, it will be necessary to strengthen the node under consideration.
Motoblock "Centaur" is considered to be an agrariantechnique of professional direction. It perfectly suits the transformation into a tractor. As a result, a reliable machine with high performance and wide functionality will turn out. It is worth noting that the diesel engine unit produces 9 horsepower. Set for reworking the motor block includes a frame from the metal profile, an additional pair of wheels and a driver's seat. The resulting technique can be supplemented by a trailer trolley, plow, blade and other attachments.
As confirmed by the reviews, comments, proposals to rework the motoblock "Agro" will require a more serious approach. It will be necessary to strengthen the driving axles with the wheel-drive reducers.
To convert a motoblock "Zubr" into a mini tractor the following elements will be required:
The conversion of the motoblock to the tractor begins with the preparation of the necessary parts and tools. Ready-made kits for this procedure are on sale. The cost of this set starts from 30 thousand rubles.
Required tools:
Before starting work, a diagram or a drawing of the intended object should be performed. This will avoid errors in the design and save time. Then you can proceed with the assembly.
First, you need to strengthen the carrier part bymounting an additional pair of wheels. Materials will require corners or a pipe made of metal. The cross-section of the workpiece used must correspond to the expected loads. The conversion of the motoblock with its own hands begins with the cutting of the frame preforms with the help of a "grinder" into pieces of the required length. Between each other the elements are connected by bolt fastening or welding.
It is desirable to immediately install on the frameattachment for additional attachments. The design can be fixed both on the front part, and behind. Welded tow hitch will allow you to work with trailing devices.
The complete set of rework of the motor-block includes two ready-made hubs for the front wheels. Frontal pair is fixed by means of a metal pipe corresponding to the axial width, hubs are attached to it.
In the center, holes are made that serveaccess for fastening to the front frame. Then the steering rods are assembled, which are aggregated with the frame and column by means of a worm gear. The rear axle is mounted on bearings pressed into the bushing. A pulley serves to transfer the torque from the power unit.
As a rule, the engine is installed on thefront frame of the frame. This allows the homemade mini-tractor to maintain the required balance when working with trailer attachments. A mounting system must be created at the motor mounting site. The power take-off shaft must be placed parallel to the pulley axis on the rear axle of the vehicle. The breaking moment is spent by means of a belt transmission.
After assembling the main structure,the brake unit and the hydraulic distributor interacting with the attachments. In the case of moving vehicles along general-purpose roads, it is reasonable to install headlights and turn signals.
To give the machine its originality andaesthetics, it is possible to equip it with a skin, visors from the sun and other elements of the ex-terrier. After running in the tractor, check it in the field or in the suburban area.
Converting heavy motor blocks into mini tractorshas its own characteristics. Consider the transformation of technology on the basis of the MTZ unit. It is equipped with an initially diesel engine with a pair of cylinders, which causes the center of gravity to shift to the front during operation. This does not have a very positive effect on the work process. The problem can be resolved as follows:
It is quite possible to make a swamp from a motoblocksnowmobile. They have almost identical design. It is important that the technique has minimal pressure on the soil. This will require the use of specific wheels with a wide profile. As suitable elements use low-pressure wheels or parts of tracked vehicles, for example from the snowmobile "Buran". Such a solution makes it possible to place standard automotive analogues in the elements. After inflating the tires, the lugs grab them firmly.
It is quite possible to build an ATV from a motoblock.It will not have the power and characteristics of a real analog, however it will improve maneuverability and patency of technology. Landing on such a car will not be a motorcycle, but an automobile type. Special wheels do not need. It will be enough to choose suitable elements from the car, which can be equipped with wide-pass rubber. If desired, the motoblock can be converted into various vehicles. At the same time, the selection of materials and time will not have a significant impact on the financial budget and time.
A modern motoblock is an irreplaceable thing forfarmers, summer residents and other agricultural industries. Its application greatly facilitates labor costs, saves time and allows to improve the quality of harvesting. A variety of attachments are provided for such an aggregate. In addition, the conversion of the motorized unit into a mini tractor with its own hands is possible with minimal costs. The technique will be useful in all seasons, from planting or harvesting, ending with the transportation of various cargoes or cleaning the territory from snow.
