Skiing on both professional andon and at the amateur level - perhaps, one of the most popular ways of winter pastime of a huge number of people. Someone prefers to actively rest at the nearest rental office of this sports equipment, well, and somebody purposefully goes to well-known ski resorts, in principle, for the same.
Undoubtedly, one of the main roles in the qualitativeand enjoyable skating is played directly by the inventory itself. The range of skis today is very large, and they differ both in brand manufacturers, and in their purpose (running, mountain, hopping). Widely and the price range, so you should immediately decide on the amount to be purchased.
Sometimes lovers of winter skating are faced witha very serious problem. How to install the mounts on skis? You can entrust the installation process to specialists, but if you want to save some of the funds and just buy additional experience, you should understand the technology of this work yourself.
In the design of this element, which is designedensure safety, the heel and the front head are included, which must be adjusted in accordance with the parameters of a particular person (weight, boot size, etc.).
On the fastening there are special pins,whose function is to fix the boot. Also there are special braces and bends that allow the foot to move freely inside, but do not allow it to slip. Usually these elements have the shape of a boot, which can not but have a positive effect on the comfort of riding.
The heel is designed to provide the skiersafety during falls. In modern samples, this ability is called vertical elasticity. In addition, this part of the mount significantly reduces the level of vibrations coming into the boot.
So, the correct fixing of skis is carried outpartly by proper drilling. Do it not by eye and not with the use of marks. Often the manufacturer can buy a special conductor, thanks to which a good result will be guaranteed.
After drilling all the necessary holes in the ski cloth in each of them is added a small amount of glue, and then the mounting itself is already mounted. Screws must fit tightly, without any shifts.
This information can be useful when thinking about how to fix the mount on the skis.
These elements make it possible to transmiteffort and set the direction of sliding when moving both in the classical style and in the ridge. It is very important to emphasize how to correctly install the mounts on skis for running, because without this knowledge even well-chosen equipment will not only be able to deliver absolutely no joy from riding, but it can also put the owner in serious danger.
Currently, attachments for this type of equipment are of three types, so each should be dismantled separately.
One of them is the obsolete Nordic Norm 75mm,called "wartime" among the masses. Its main advantage is a relatively low price, but otherwise its technical characteristics leave much to be desired. It fixes the foot badly and, despite the rigid fastening of the toe of the boot, the entire sole slips due to insufficient lateral and longitudinal stability. The ridge style of running in this case is practically impossible, and the classical one goes out a little better. Such installation of fastenings on cross-country skis will not bring to the owner of pleasure from driving, therefore it is necessary to pay attention to two other types of fasteners.
These samples belong to the models of the new, innovative generation. These include the SNS system and the NNN system.
It will be quite difficult to compare these two mounts, since each of them is a device with extremely high performance.
The functioning of these two systems lies in thethe technology of using flexors and guides, which greatly simplifies the task of how to put fasteners. On skis with such fasteners, the sole of the shoes lies firmly and comfortably, and additional stabilization during skating with both classic and ridge moves gives a sense of confidence and greatly facilitates the movement process.
The fixation level of each of these two samplesis a tourist, sometimes even equipped with automatic fastening. This option is perfect for amateur skiers whose skating skills are not yet well developed.
The SNS system appeared a little earlier, and the main difference is that there is only one longitudinal component in the fastening structure, while the NNN type has two.
It's no secret that the main difference between running andmountain skiing - this is the connection of shoes with the first one with a different pattern of fastenings. And since the differences between the two above-mentioned systems are insignificant, the emphasis here should be exclusively on the choice of shoes. Determining how to properly install the ski bindings, you should pick up shoes that will match the style of riding and differ in unique comfort and design, and then deal with the standard of fixing them.
This kind of sports equipment is suitable, asit becomes clear from the name, only for skiing on the slopes. For running such skis are not adapted, since they have other parameters of length and width, and also differ from other samples by their technical characteristics. But, anyway, it is extremely important to know how to put the fixing on skis of this type, because descents from the peaks require increased security, ensure that it is possible only through a secure fit of the whole structure on the leg.
To avoid poor performance, all actions for this type of equipment should be performed strictly according to the following instructions:
1. At the center of gravity of the skis, which can be found with your own hands, a line is delineated.
2.The fastening fits so that its front edge reaches just before the drawn label. The boot is carefully inserted into the retainer, which is adjusted so that its entire base is centered, since only in this case the installation of the skiing mounts will be correct.
3.Then the shoe is removed, and in the place of its location through the holes in the fixer, small holes are made, which can be done with an awl or a drill with a cross section of 1.5-2 mm in diameter. Then, using a screwdriver or a screwdriver, the supplied self-tapping screws are wrapped.
4.The boot is tightly fixed in the holes. It is important to follow the whole algorithm of actions so that at the end of the whole work the retainer is rather rigid, comfortably fit your leg and meet all the requirements of the safety rules for riding.
This instruction will help you to understand how to properly install the mounts on skis, designed for driving on mountains and steep slopes.
