On winter fishing, the presence of an icebreaker is soas an obligatory condition, as well as a fishing rod with bait. Today there are no problems with such equipment, as the market offers a lot of specialized automatic boers. Nevertheless, the cost of such devices causes a considerable part of the fishermen to resort to alternative and, as a rule, cheaper variants of such devices. Experts on winter fishing recommend immediately to navigate the screwdriver for the icebreaker. Which one to choose is the main question, since there are several criteria for evaluating a suitable device. But the choice of the basis for the drill is not enough. It is also necessary to know the technique of assembling such inventory and other nuances.
As with any other tool, there will beit is superfluous to estimate at least the average complexity of the forthcoming work with ice. Approximate data will allow you to make a more accurate choice. If you are supposed to work with a universal device, you should take into account the two main indicators - power and torque, which will have a screwdriver for the icebreaker. How to choose a device in terms of performance - in this matter it is worth to build on the stress. The power must be at least 18 V. If you want to work with thick ice and have a good amount of money on your hands, then do not abandon the model with a voltage of 36 V. It is this characteristic that will determine what will be the power capacity of the icebreaker and its ability to penetrate the most problem layers of the ice cover. Do not also forget about the torque. This parameter varies on average from 50 to 70 Nm. This value determines the screw speed. Again, the higher the torque, the easier it will be to drill.
With the adapter is provided connectionscrewdriver with the working part of the device, that is, with a drill. In principle, with the help of such an adapter, it is possible to make a full power tool from any screw intended for manual use. The main thing is to correctly compare the sizes of these components.
The adapter is provided with a special shaft from the sidedrill bit and a hex head for a screwdriver. The parameters can be as follows: the shaft length is 6.8 cm and the distance from the fastening to the end is 2.6 cm. In order for the "adapter - screwdriver" circuit to be correctly formed in practice, attention should be paid to the diameters. Again, the standard sizes range from 1.8 to 2.2 cm. It is advisable to purchase adapters with handles and a special stop for protection against falling out. It would seem that any structural add-on will reduce the productivity of the drill during operation. Nevertheless, inveterate fishermen note that in the work on the foreground comes convenience in handling the device, and the power of the screwdriver in most cases is abundant with excess.
Obviously, only the models working on the battery will have to choose, since there will be no access to the network for fishing. In this regard, it is worth noting three options for batteries for a screwdriver:
If we sum up the results in this part, thena combination of characteristics and based on the experience of seasoned fishermen, the optimal solution is to call nickel-cadmium batteries. Despite the high weight, these batteries provide the highest degree of reliability in cold conditions - and this is a key advantage for the fisherman in the winter.
At the final assembly stage,there are three basic elements. Among them, directly auger, screwdriver and adapter. It is best to use the components of one firm. In particular, the drill is purchased in one set with the adapter, and then connect the device to the drill. If you have to deal with different designs, it is initially desirable to purchase models with hinged connections. This configuration extends the options by which you can compose the icebreaker from a screwdriver. How to make a self-made electrorube from different parts? If the accessories correspond to each other in the size of the diameters, it will be sufficiently reliable to fix the auger and screwdriver from different sides of the adapter. If there is a difference in diameters, then it will be necessary to modify the adapter. This element has two parts - the shank for the drill and the hexagon for the drill. Usually all possible alterations mean the inclusion of a hexagonal key with a L-shaped design, which is selected strictly to the required dimensions.
Comparing the hybrid design including the augerand a drill, with automatic ice screws and modifications from the chainsaw, we can assume that there are many shortcomings in such a device. And yet, experienced fishermen prefer not only a screwdriver for an ice pick for the sake of economy. Which option to choose for capacity and size - this is decided in each case individually. It is important only not to forget about the minimum power and torque indicators. However, experienced users note other advantages: first of all, ease of assembly, functionality, reliability and ample opportunities for improvements.
It is difficult to argue with the fact that much in the successDrilling will depend on the selected drill with the adapter. And nevertheless it is necessary to take into account the characteristics of the auger. After all, this element will complement the screwdriver for the icebreaker. Which one should I choose? First of all, it is worth paying attention to metal. Today, stainless steel and cast iron are popular. Further it is necessary to take into account the size and shape - these parameters also determine the quality and convenience in the process of drilling the ice cover. In any case, the choice of each component for the future icebreaker should be done based on the general requirements for the device and in advance assessing the possibilities for further assembly of the structure.
