In the process of construction or repair is impossibleTo avoid such an operation as the cutting of wooden, plastic, foam or other elements at a certain angle. For this, there is a special tool called "stool". With this tool, you can easily cut any workpiece under a fixed or self-determined angle. For novice artists who do not know how to use the chair, this article will be useful.
The principle of the action of a simple chair
A simple chair is a rectangular platform made of
plastic or wood, with raised sidewalls, onwhich have several guide slots (90, 45 and 60 degrees). At the bottom of the platform, the workpiece is laid and cut off at the desired angle with a hand hacksaw. It should be noted that the technology of working with flat elements, for example, with door frames, a bar or a board, differs from sawing corners on skirting boards or ceiling baguettes. Therefore, you need to remember how to use the chair correctly. In both cases, first of all, it is determined what kind of angle - right or left - is needed. But if the board or clypeus lies flat on the platform, the plinth should be laid on it with the side that will go to the floor or to the ceiling. Only by observing this rule, you will never go wrong and make a beautiful and right angle.
Turning stool. How to use?
A simple chair with three anglesuse "home" wizard. For professional activities, more complex devices with a rotary mechanism are most often used, which allows you to independently set any angles of cutting, even the smallest trajectories. The accuracy of this tool is very high, which guarantees the quality of finished products. Before using the turntable, the sawed material must be fixed with a special device. Then, according to the marks, the required angle of inclination of the saw blade is aligned and fixed. After that, the mechanism is ready for operation.
Electric chair
How to use the electric chair?This is the most modern and technological device for obtaining accurate and beautiful angles. In its operating principle, this tool is similar to an electric saw with the option of adjusting the angle of the saw blade. This is a serious design consisting of a table equipped with special supports and digital indicators for precise setting of the cutting position. In equipping some models laser marking is provided, making the process of sawing any material almost perfect. High accuracy, excellent quality and high speed of operation are the main advantages of this tool. Before using the electric chair, it is necessary to carefully study the instructions to it and familiarize yourself with the safety rules when working with this type of electric saw. After that, fix the material on the table, use the drawing accessories to mark the line of the future cutting, set the desired angle on the digital panel and work.
