Elements such as industrial LEDlamps, are a good alternative to obsolete lamp analogues. They meet all modern requirements for industrial lighting and have a wide range of applications.
Most often, specialized fixtures are installed in industrial buildings of the following types:
- enterprises of industry;
- Production workshops;
- construction sites;
- warehouses.
Projects for the lighting of particularly heavy industriesshould take into account the load on the light devices, so you need to select them in advance and correctly. Industrial LED lights must meet all accepted norms and standards.
Often in industry, metal halide lamps or luminescent lamps are installed. Their choice is determined by the low cost of devices and uniform dispersion of light.
- Economical. Such lamps require less power, so the liberated energy can be fashioned to other processes.
- Долговечность.Industrial LED lights remain operational for 50,000 hours, with proper use, this figure is doubled. At the same time, the lamps do not require additional maintenance.
- Payback. Despite the high price of the lamps themselves, they pay for themselves in 2-3 years, while not requiring repair costs, which allows the company to increase profits.
- Increased protection. For rooms where high humidity, produce special industrial LED lights, which are additionally protected from the external environment.
- Quick turn on. The luminaires do not flicker before starting work, which reduces the burden on the eyesight of the personnel.
- Uniform distribution of light.
Industrial LED ceiling lamps produce without additions and excesses, because the scope of their use is not office premises, but workshops and other production facilities.
- The lighting device should not create glare, so there is a variant with a reflector that excludes glare and normalizes the work of the personnel.
- The selected luminaires should ensure uniform lighting of the entire room, while creating the possibility for mobility of equipment, that is, changing the workplace.
- Some industrial LED ceiling lamps have the ability to change the brightness, directing a beam of light to the desired location.
- In places where there is increased contamination or humidity, it is better to install lamps with a reflector at the bottom.
Возможность встроить светодиодные светильники не always happens, therefore in production the ceiling version of the installation is the optimal solution. It will not require changes in the architecture of the building, at the same time it will provide the whole room with quality light.
Suspended industrial light fixturescan be attached to one or two suspensions. They also differ in form. They can be: round or square, rectangular, in the form of narrow panels or with shades in the form of a sphere, and also non-standard.
Pendant industrial light-emitting diodelamps should be based on the shape and area of the room. Not the last value has its purpose. Ordering lighting devices in batches is better, so the risk of divergence in design or form is reduced.
Во многих производственных процессах присутствует a significant amount of dust, and sometimes moisture. The best protection of light devices from the external environment will be the timely installation of lamps such as LED light fixtures industrial ip65.
To stop the choice on such devices,as LED lighting fixtures for industrial premises, should be for many reasons, in particular they are indispensable in lighting places where work is done manually and requires special accuracy.
Halogen lamps are effective, compacts andare economical, it is these qualities that attract consumers. They can work both on a constant, and on an alternating current. In the halogen lamp there is a buffer gas, which reduces the performance of the device to only 4 thousand hours. The lamp can be heated to a very high temperature, so when working it should not come into contact with objects. This is the main disadvantage of such devices. Modern lamps are covered with infrared composition, which increases their service life in half.
Fluorescent lamps have a wide range of advantages: long service life, increased efficiency, independence from voltage drops, heat up to a maximum of 50 degrees.
Produce them with heat-resistant casing and protectionIP65, equipped with a starter or electromagnetic choke. Lamps with moisture protection have a lighter construction and can be made in one or two-lamp version.
