Error 628: description and removal

Our life is full of various gadgets anddevices to go online. To date, every, even the most ordinary hours, sometimes go online. Then why does an error 628 appear in the instruments from time to time?

The newer and more technologically advanced the device, theThinner and more complex it is arranged. Failures and errors occur regularly for various reasons. In conditions of a frantic pace of life and total dependence on the Internet, it is very important to quickly fix the communication error and resume the connection. The article will consider error 628.

Definition

Error 628 means that the Internet connectioninterrupted by a remote device. Most often, this problem is faced by subscribers of operators "Beeline", "MTS" and "Megaphone". What should I do when there is an error 628 when connecting to the Internet provided by different providers?

Causes of appearance

Causes, as a rule, there are two:

1. The connection is suspended by the provider due to non-payment or non-compliance with other terms of the contract.
2. The connection can not be established for other reasons, not related to the provider. Usually this is the congestion of the server or the modem itself.

That is, the device will generate an error 628, when, for whatever reason, there was no connection between the home modem and the server of the service provider.

This happens when:

1. The ISP server is overloaded and can not cope with thetraffic. In the event that the modem is used for a long time and suddenly there is an error 628, most likely, the reason lies in the server overload.
2. If the modem is new and has not yet worked, reportsabout such an error, the problem may be in the incompatibility of the computer's operating system and the modem's device. Incorrect installation and configuration of the modem operation is also possible. Or you just need to replace the modem model. After all, there are cases of marriage.

As already mentioned, subscribers of Beeline, MTS and Megafon are most often faced with such a problem. How to get out of this situation when connecting to different operators?

Troubleshooting

How do the subscribers of "Beeline" make a mistake 628?This operator has one more added to the existing two reasons for this error. To access the Network using a "Beeline" modem, it is necessary that the account has at least ten rubles.

Of course, if the modem was purchased recently andused for the first time, you need to contact the operator or, most likely, just replace the modem model. In the event that the cause of the error was server overload, it is also advisable to consult the operator. But when and on the account more than ten rubles, and the operator says that everything is in order, and in use the modem for a long time, then what to do? In this case, you can reinstall the program yourself.

Via the "Control Panel" you must deletethe Beeline program. After that you need to disconnect and reconnect the modem. The installation window appears. You must reinstall the program on your computer. After reinstalling the program, you must create a new profile, the old profile must be deleted. Only profile settings should be:

• In the APN column, you must select the "static" position and specify - internet.beeline.ru.
• The access number is defined as * 99 #.
• Set the username and password as beeline.

With further connections, you should use this account.

If the connection operator is MTS: error 628 and its solution

First you can try to just restartmodem or computer completely. In most cases, this simple action helps in solving the problem. Through the "Properties" window, you must select "Additional initialization commands" and specify the following: AT + CGDCONT = 1, "IP", "internet.mts.ru". After saving, you can resume connection attempts.

Error 628 (operator "Megaphone")

Most often, the computer reports an error 628 withusing the services of the operator "Megaphone" due to the hang of the program itself. In this situation, a simple reboot of the computer will help. However, not always such a magical action can get rid of the problem. If this is the case and the error after the reboot has not disappeared, then you can use the following recommendations:

• It is worth checking the status of the personal account of the modem.
• If the balance is in order, then it is necessarymake sure that the modem is initializing correctly. Using the properties menu and additional initialization parameters, open the command line. In the opened line specify: AT + CGDCONT = 1, "IP", "internet". In my connection properties, find "Cancel calls when there is no connection" and change the timeout by setting the value for more than a minute.

If after performing these operations the error is allstill there is, then consultation of the operator is necessary. Most likely, the error will be associated with a mechanical breakdown of the modem. Life does not stand still, like technology, innovation, communication and the Internet as such. Gadgets and devices for access to the Network are developing rapidly. It is possible that in the near future it will be possible to completely eliminate all communication errors.