Setting up the Samsung TV is not enoughIt is complex, as it may seem at first. It can be done independently without problems. Especially since the menu of this manufacturer is characterized by a great degree of unification, and this makes it possible to do this operation with minimal time. It consists of the following steps: connection, channel search and image and sound correction.
Switching
Setting up the Samsung TV begins withcommutation, as it was said before. At the first stage, the wire from the local television antenna is installed. Further, if necessary, a CAM module must be inserted into the special slot. This will allow you to watch encoded channels in digital quality. Additionally, you can connect a satellite receiver through the RCA, SCART or HDMI interfaces. A digital tuner can be connected in the same way. If the TV is equipped with an RJ 45 jack, then it can be connected to a twisted pair from a laptop, a PC or a router. At the final stage, you need to connect the power cord from the outlet to 220 volts. And only after that you can turn on the power button on its front panel.
Channel Search
Next, you must give the command to switch on fromremote control. To do this, click the appropriate button on it. Setting up the Samsung TV at this stage consists in automatically searching for available channels. To do this, you need to change the menu language. Press the corresponding key and find the item "Setup". We go into it by pressing the "Enter" button. Then we look for the "Language" item. Again, press the same button on it, change its value to "Russian" and exit the menu. Then, by pressing the "Menu" again, we return and find the "Settings" item. It should contain the section "Searching and tuning channels". In it, select "Autotune". Next, you need to wait for the time necessary for the TV to scan all available ranges. At the end of this operation, the first channel found will be included. You can view all available transmissions by switching the corresponding buttons on the control panel. When using an external device (satellite receiver, for example), you must select the source of information for the TV by pressing the "Source" button. Then the choice of programs will already be done using his console.
Sound and Image
The next step is to configureTV "Samsung", associated with the image and sound, correct. Well, if everything suits right away. But this does not always happen. Then go to the main menu previously described. In it we find the "Service menu". Next we need to find "Image" and "Sound". In each of them there are a number of parameters that need to be set by fitting to the required values. Adjustment of the LCD TV should begin with the correction of the picture, and only then you can proceed to the speaker system. At the end you do not need to save the set values, this operation is automatic.
conclusions
Setting up the Samsung TV is not so muchIt is difficult procedure, as it seems at first glance. She is capable of everyone regardless of his qualifications. Following the previously stated algorithm, you can easily set up any TV of this Korean manufacturer. Including models with support for 3D and SMART TV. At least, the basic settings for them are set in a similar way.
