/ / Honda CBR 250: specifications, reviews

Honda CBR 250: specifications, reviews

The Japanese Honda CBR 250 motorcycle was developedconcern "Honda" in 1986 as a sports superbike with high dynamic characteristics. The relatively small displacement of the engine cylinders made it possible to develop a capacity of 45 liters. with., which provided the car a good sprint at the start, as well as high maneuverability in urban conditions.

honda cbr 250

Update

The release of the Honda CBR 250 motorcycle continued to1996, after which the production of the popular bike was transferred to the low-series assembly mode, and in 1999 the conveyor was stopped. The CBR 250 was replaced by other models. However, two years later, the Honda CBR 250 was produced at the Honda plant in Thailand, with a single-cylinder injection engine. In principle, it was already another version of the motorcycle. The new Honda CBR 250, the characteristic of which differed significantly from the parameters of the previous model, was forced again to win its place in the market. And I must say that the updated sportbike did not take much time for this, the demand for an economical motorcycle was high.

honda cbr 250 testimonial

Modifications

For ten years of production, the base model of HondaCBR 250 has undergone a number of changes, seven different modifications have been released. The classification of each new version was determined by the index in the digital chassis set. For example, when the motorcycle frame number began with the MC14, this indicated the presence of a semi-fairing, an indivisible front headlight and a double disc on the front brake.

  • Modification in 1987, the chassis number begins with MC17 - a full fairing is installed on the motorcycle.
  • Version 1988, number MC19 - double disc front brake replaced by a single increased diameter.
  • Modification of 1989, MC21 - the changes are insignificant. The injector is equipped with a regulator that limits the speed of the motorcycle within 185 kilometers per hour.
  • 1991, chassis number starts with MC22 -the changes are substantial, the model undergoes restyling. There is a new frame made of composite aluminum, more rigid and technological. The front brake is again a two-disc, but the diameter is increased to 276 mm. The pendulum-pendulum rear suspension receives a swing amplitude within 180 millimeters. Spoke wheels are changed to cast aluminum. The dry weight of the motorcycle is reduced from 148 to 142 kilograms.
  • Modification of 1993, chassis number MC22-E. There are no design changes, but the color gamut of the motorcycles produced is significantly expanded.
  • Version 1994, frame number of the lastmodification of the Honda CBR 250 begins with MC23. Cardinal changes touched the engine, reduced power from 45 to 40 liters. with., in connection with the law that appeared in Japan on the conformity of the cubature of engines of their power.

honda cbr 250 specifications

Honda CBR 250, specifications

Overall and weight parameters:

  • type of motorcycle - sports;
  • chassis - frame made of aluminum, cast;
  • length of motorcycle, mm - 1975;
  • width, mm - 675;
  • wheelbase - 1345 mm;
  • the height along the rudder line is 1080 mm;
  • the height along the saddle line is 735 mm;
  • capacity of gas tank - 13 liters;
  • fuel consumption - 4.5 liters per 100 kilometers, in the city, 2.5 liters on the highway;
  • The speed with the limiter is 180 km / h;
  • dry weight - 142 kg;

Power point

Its parameters are as follows:

  • engine type - four-stroke, petrol;
  • volume working - 249 cube / cm;
  • number of cylinders - 4;
  • diameter of the cylinder, mm - 48,5;
  • number of valves - 4 per cylinder;
  • stroke of the piston - 33,8 mm;
  • compression - 11,5;
  • power supply - four carburetors VP-20;
  • cooling - water;
  • start - electric starter;
  • ignition - electronic;
  • power maximum - 40 liters. from. at 15,000 rpm;
  • moment twisting - at 11 500 rpm - 23.5 Nm;
  • transmission - gearbox, six-speed;
  • clutch - multi-disk in the oil bath;
  • drive transmission to the rear wheel - chain.

honda cbr 250 reviews

Chassis

The main characteristics are as follows:

  • front suspension - fork telescopic, diameter of feathers 37 mm;
  • rear suspension - hinged pendulum, stroke 130 mm;
  • front wheel, size - 110 / 70-17 ";
  • wheel rear, size - 140 / 60-17 ";
  • brake front - double disk, diameter 275 mm, double piston caliper;
  • rear brake - single-disk, diameter 220 mm, single-piston caliper.


Parameters of single-cylinder version Honda CBR 250

Characteristics of the modification of the 1999 issue:

  • engine - SOHC system, four-stroke, gasoline;
  • cooling - water;
  • working volume - 248 cube / cm;
  • stroke of the piston - 55 mm;
  • compression - 10.7 to 1;
  • diameter of the cylinder - 76 mm;
  • power maximum - 26 hp;
  • engine speed - 8500;
  • torque twisting - at 7000 rpm 22.9 Nm units;
  • ignition - electronic transistor system;
  • start - electric starter;
  • transmission - six-speed gearbox, with lever-shifting speeds;
  • drive transmission to the rear wheel - chain;
  • chassis - steel frame made of one-piece profile;
  • front suspension - fork telescopic, diameter of feathers 37 mm, stroke amplitude 130 mm;
  • rear suspension - swingarm pendulum with mono-shock absorber, swing stroke 104 mm;
  • brake front - ventilated monodisk, diameter 296 mm, caliper double piston, pads metallized;
  • rear brake - single ventilated disc, diameter 220 mm, caliper double piston, pads metallized;
  • length of motorcycle - 2030 mm;
  • width - 709.5;
  • height - 1127 mm;
  • the height along the saddle line is 784 mm;
  • ground clearance, clearance - 148 mm;
  • the distance between the axles is 1369 mm;
  • front wheel, size - 110 / 70-17MS;
  • wheel rear, size - 140 / 70-17-MS;
  • dry weight of the motorcycle - 148 kg;
  • capacity of gas tank - 13 liters.

motorcycle honda cbr 250

Responses of owners

For the entire period of production of Honda CBR sportbike250 more than one thousand motorcycles have left the assembly line. It is characteristic that there were practically no negative feedback on the quality of assembly from buyers. Honda CBR 250, reviews on which the overwhelming majority were positive, is one of the most popular models of the second half of the last century.

Owners of sportbike in the first placeits high speed characteristics. Knowingly engineers of concern "Honda" have found it necessary to limit the speed of the car by partially blocking the fuel supply. Otherwise, the bike easily picked up more than 200 kilometers per hour. And this was a direct violation of the law on restrictive measures that apply to sports bikes with an engine capacity of up to 250 cubic centimeters.

Many owners expressed their positiveopinion on the economics of the motor. With impressive dynamics, unprecedented acceleration and high revs, the four-cylinder engine consumed slightly more than four liters of fuel for every hundred kilometers. The gasoline tank, with a capacity of only 13 liters, allowed to drive without refueling about four hundred kilometers, which is a kind of record for the sportbike.

Liked:
0
Popular Posts
Spiritual development
Food
yup