Each city apartment mustbe installed on the water meter. It is important not only to install such a device, but also to register it with the appropriate service. In order for the water meter to be put into operation, a special conclusion is required, which indicates that the installation of the water meter was carried out correctly, as well as the act describing the result of checking the device for tightness and the presence of a seal. The last document is very important. The specialist of the relevant company should install a seal on the meter. This limits access to the details of the device and does not allow to change the readings. In addition, the seal is the basis for recalculating the volume of water supply. Can I install it myself? How to seal the meter on the water?
Before answering the question of howto seal the meter on the water, you need to figure out why it is needed at all. According to the law, only those devices whose accuracy has been officially confirmed can be used. To do this, the seals are installed on the counters. Its integrity confirms:
In what situations need to seal the counters onwater? Chelyabinsk, Moscow and other cities of the country do not do without special services, which make sealing of metering devices. A similar procedure may be required when installing a new fixture. Of course, many ask the question of how to seal the meter on the water themselves. Is it worth doing? Experts do not recommend carrying out a similar procedure on their own. After all, to register a new device, you must submit documents from an organization that has the right to conduct such work. So, re-sealing the water meter is required if:
It is necessary to seal the meter in almost any situation when it is damaged as a result of mechanical impact or was replaced.
To recalculate the payment for water,it is required not only to install the metering device, but also to seal it, and then to register it. If this is not done, the size of the charges will correspond to the tariff. Since it is impossible to seal water meters on your own, it is necessary to invite a specialist from the organization who has permission to carry out such work. Otherwise, the water meter cannot be registered. The most important thing is for the company to issue an act of sealing.
Before starting work, the specialist should checkwhether the meter is set correctly, and whether it is intact. After sealing, the employee must deliver the package of documents required for registration of the water metering device to the apartment owner.
The company should be chosen with special attention.Sealing water meters can only be the organization that has the appropriate license. Most often, these companies work in conjunction with the Criminal Code, Department of housing and communal services, TSZH and so on. After all, according to the Federal Law “On Water Supply and Wastewater Disposal” dated 12/7/2011 No. 416-FZ, the metering should be sealed free of charge by an organization that deals with water supply for apartments.
However, in some cases it is required to pay a fee. This applies to those cases where the replacement of a damaged seal with a new one was carried out.
Since the meter can be sealedonly a specialist, you should carefully choose a company. How to choose the right wizard? When choosing, you should pay attention to the availability of such documents as:
In addition, a company specialist shouldsubmit to the apartment owner a package of necessary documents: an installation certificate, a contract for installation of a water meter. It is worth considering that the responsibility and correctness of the installation of metering devices is borne by the company that carried out such work. In this case, all work must be carried out in accordance with all requirements of the supervisory authority.
Многих интересует вопрос о том, как поменять water meter and seal it? If the meter was only installed, the apartment owner should call the employee of the management company. The specialist of this organization must confirm that the installation of the water meter was made without any violations. In this case, an act of putting the metering device into operation must be drawn up. After that, the meter is sealed.
It is worth considering that in some cities to conductsimilar work is permitted only by public utilities. In such situations, the sealing of the water metering device will be carried out by two employees: a representative of the municipal service and the Criminal Code. Exactly the same actions occur when replacing the water meter.
How much will it cost to seal the counters onwater in Orenburg, in Chelyabinsk and in other cities? It all depends on who can do the job. The term of sealing the metering device, as a rule, is specified in the meter data sheet. Most often, this figure depends on the model of the water meter. It is worth noting that the sealing of those devices that were released long ago, gives less time than the new devices. Usually representatives of the organization come within 5 days. In this case, the owner must have not only those passport, but also the act of installation.
In this case, the specialist is interested only inwhether the device was installed correctly, and whether its integrity was not compromised. After the inspection, the employee must draw up a water meter commissioning act, and then seal the node. The apartment owner should carefully review the contract. Often, it indicates a fairly high monthly fee, a fee for verification, as well as insurance. After signing all the papers, the accrual of all expenses on the counter begins.
The contract must be executed in severalcopies. One of them remains with the owner of the apartment. The registration certificate of the water metering device must also remain with the owner of the living space. An employee of the organization can only copy it. Copies of documents can be made in advance.
You can call up to seal water meters mastersfrom local service or to seek help from private organizations. In accordance with the law, this procedure should be carried out free of charge upon the initial installation of a water meter, after repair or inspection. The fee is charged only in cases where the water meter was damaged and failed due to the fault of the user.
In this case, the prices of each company on suchtheir services. As a rule, the price ranges from 500 to 2000 rubles. It is worth noting that there is a practice of appealing such payments through the courts. Many seek to return their funds spent on sealing the counter. To do this, you must apply to the court of residence. Complain about how companies serve, and you can Rospotrebnadzor.
When buying a meter for water metering is specialAttention should be paid not only to its equipment, but also to the presence of a technical passport. This document should not be a photocopy, but a printed edition. In the technical passport, as a rule, the serial number of the device is indicated, which should coincide with what is indicated on the water meter itself.
After installing the meter you need to register it. This requires:
It should be noted that in cases whereA company representative is not able to install a seal at the appointed time, he must contact the owner of the apartment and set a new date. However, all work must be carried out within 15 days after the application was filed.
Now you know if you can seal the meter.on the water yourself. It is worth noting that you can install the water metering device yourself. However, after that, it is still necessary to invite a specialist from the relevant service to draw up an act and conclusions on the correctness of the installation of the water meter. It is not recommended to seal the water meter yourself. This should be done by an employee of a company licensed to carry out such services.
