/ / Installation curtain rod for curtains depending on its variety

Installation of curtain rod for curtains depending on its variety

Even the installation of such a detail of the interior as the cornicefor curtains, requires certain skills and skill. After all, it is necessary not to damage the wall or the structure itself during installation. Therefore, the question arises as to how correctly the installation of the curtain rod is carried out.

Features of installation of structures

Before you buy a curtain rod for curtains, you shouldtake into account the weight of the selected model. The more complicated the cornice, the higher its mass, and therefore, the surface to which you will attach it should be denser. Because of this, one has to sacrifice the aesthetic side and acquire non-heavy constructions.

installation of cornice for curtains

If you still have the opportunity to installmassive structure, then in the hole for self-tapping fill the epoxy resin (a little) and only then install the fasteners. And you can continue working only after the resin hardens.

Installation of curtain rod for curtains will be faster if you have the necessary tools and materials:

  • Punch.
  • Stairs.
  • Device for screwing screws.
  • Roulette and pencil.
  • Self-tapping screws and dowels.
  • Level.

Before you get started, you shouldmake sure that the eaves do not interfere with the opening of the window and the curtains do not touch the sills. Do not forget to take into account the size of the heating battery, if it is located under the windowsill.

The distance from the window to the marking for the brackets should be the same. Usually a plastic or wooden bracket is attached to one screw, and a metal bracket to three.

Make holes for dowels and fasten them. Then attach the bracket with screws. Before installing the second measure again the gap between the holes, then put the barbell.

Rings on the bar should be worn after you have verified the solidity of the design. At each end of the rod can be installed decorative elements.

These were the main points that must be observed in order for the installation of the curtain rail for the curtains to be successful.

Ceiling curtain rods

Installation of ceiling curtain rods for curtains has its own peculiarity, because their design is made in such a way that the devices themselves are not visible behind the curtain.

The design of the ceiling eaves consists ofempty tires with multiple lines. Most often, such a cornice is made of plastic, so consider the weight of the curtains so as not to break the product during operation.

installation of ceiling curtain rods

By type of construction, such eaves are divided as follows:

  • with one row;
  • with two;
  • with three;
  • with four rows.

By fastening method:

  • Through the holes in the cornice.
  • On brackets with hangers.

By itself, installing a curtain rail for curtains should not cause you a lot of problems if you follow all the installation instructions.

Installation of eaves to the ceiling

Installing ceiling moldings for plastic or metal curtains requires the following steps:

Installation of curtain rods for prices

  1. Having a measure of the length of the eaves, cut the structure. To do this you need a hacksaw.
  2. Assemble the eaves, wearing curved elements and plugs for hooks.
  3. Make a hole in the center of the eaves. At the same time, start drilling with a thicker drill, and finish with a thinner one.
  4. Then make the same holes along the entire length of the product. Consider the severity of curtains: the higher it is, the more often holes are needed for fastening.
  5. Attach the structure to the ceiling so that it is parallel to the window.
  6. Through the central hole make a mark on the ceiling.
  7. Drill a hole in this place and fasten the eaves while on one screw.
  8. Align the structure and place the dots in the other holes. Only then drill the following holes in the ceiling and fix the eaves.
  9. If initially you had wooden ceilings, then it is enough to attach the structure to the screws.

Also do not forget that if your cornice is quite wide, then it is better to make holes in two rows.

Features mounting flexible cornice

In today's world, people often follow fashiontrends, including the design of their apartments. To revive the interior, they choose specific options with window openings. For example, the installation of a flexible eaves for curtains, which requires adherence to several rules.

In general, the mounting of such a cornice is not particularlydifferent from the usual. It can also be placed on the ceiling and on the wall. It is only necessary to drill a few holes, according to the location of the mountings, in increments of thirty to fifty centimeters.

installation of a flexible curtain rail for curtains

After attaching the console, you fasten the slider and install the plugs.

If you have acquired really high-quality flexible eaves, then it will be bend well in any direction necessary for you.

Важно знать, если вы еще только стоите на пороге choosing the necessary construction and just ahead is such a procedure as installing curtain rails for curtains: the prices of the structures themselves will vary, depending on the material and complexity of the model. And also it is necessary to take into account the length you need. For example, in Moscow, the installation of a simple direct cornice for curtains will vary within 750 rubles per unit, without additional services. If the construction is more complicated, then the company will take from 1,500 rubles and up.

After the acquisition, if you follow all the instructions, an independent installation procedure will not be fantastic for you.

Liked:
0
Popular Posts
Spiritual development
Food
yup