Водосточная система для кровли представляет собой a range of products that is responsible for the quality and timely removal of fluid from the roof. They can be made of different materials. As soon as the water is in the gutter, it enters the sewer system or the ground. If the drainage system is made correctly, then it will allow preserving the original appearance of the building and its reliability and eliminate premature wear of materials.
In the vastness of the modern market can be founddrains, which are presented in a wide range. Among others, the Grand Line should be highlighted. The gutter system of this company has an acceptable cost and excellent technical characteristics.
Grand Line production process tirelesslybeing improved and modernized. New technological developments are being actively introduced, specialists make additions to the production process, which allows to obtain a product that has no analogues in its segment.
Grand Line - drainage system, withthe manufacture of which uses a special alloy of steel, obtained by the technology of cold skating. The surfaces of the products are covered with zinc, which guarantees protection from external influences. The thickness of the elements is 0.6 mm, while on top the drainage systems are covered with a polyurethane substance, the application of which allows to improve the technical characteristics.
Grand Line - the water waste system possessing:
If you compare polyurethane withplastisol and polyester, the first material in its technical characteristics is much higher than the rest. With its help, it is possible to obtain products that can be used at a wide range of temperatures varying from -60 to +120 ° C.
To increase reliability, drains are coveredpolyurethane on both sides. The manufacturer guarantees that within a decade from the beginning of operation, the drain will retain its original appearance. Within 25 years of operation, it will be different constant technical characteristics.
The manufacturer uses another variation.protection - Aluzinc. It is a galvanic substance that provides corrosion resistance and color stability during the entire period of service. The Grand Line is a drainage system that is covered with EasyfilmS organic matter, which is responsible for ensuring that no prints remain on the products after touching. In addition, such processing also guarantees mechanical protection so that the products are not damaged during installation and transportation. Such drains can be operated with an even wider temperature range, which ranges from -60 to +315 ° C.
The described drains are simpledesigns, so you can install them yourself. However, before starting work it is important to stock up on a certain set of tools, among them:
Installation instructions for drainage system GrandLine involves the installation of hooks. First, use long hooks for the gutters, which should be in place before laying the roofing material. For fixing, you should use the eaves board or rafters. The final decision will depend on the configuration of the roof and the wishes of the owner.
If the roof is already equipped, then you can do withoutshort variety of hooks, which is mounted on the frontal board. The distance between fasteners remains unchanged and is equal to 0.6 mm. For convenient drainage into the funnel, such hooks should be installed with a slight offset.
Metal drainage system Grand Lineprovides for funnels and plugs. To do this, cut holes in the gutters where you plan to place the funnel. The width of the hole will be equal to the limit from 100 to 110 mm, if the system has dimensions equal to 125x90 mm. The width increases to the limit from 120 to 130 mm, if the dimensions are equal to 150x100 mm. The pitch between the end of the gutter and the funnel should be 150 mm, while 15 mm should be left as the gap from the notch to the upper edge.
A funnel should be installed on the gutters,it can be strengthened with a lock joint by tilting the lock inward. The plug will be located on the same ends of the gutter, which are not adjacent to other components of the system. For reliable sealing of the joints should use the appropriate composition, you can optionally use rivets. The joints are sealed with a rubber mallet.
The drainage system Grand Line 125x90 mm will behave in the gutter, installation of which should be carried out according to a certain technology. One of them is installed inside the hook, and then it is wound into a retainer and fastened with the help of a plate-type part. In the manual, you can find information that the lower part of the gutter should be located 6 mm above the inner side, this will prevent liquid from entering the facade.
In place you need to install the cornice bar,which gets inside the gutter from below, this will prevent the frontal board from getting wet. Under the bar, a waterproofing barrier is displayed, which will guarantee unobstructed drainage. Complaints are connected with special elements with rubber gaskets, which allow to compensate for thermal expansion, ensuring tightness.
Drainage system Grand Line, the price of whichwill be made up of the cost of individual elements, suggests the presence of a semicircular gutter, connecting gutter and cap. If the size of the gutter is 150x100 mm, then its semicircular variety will cost 1092 rubles, while the connector costs 198 rubles. As for the stub, then it will have to pay 167 rubles.
