Modern household appliances greatly facilitateslife of a person. It almost completely takes on this or that task, fully responsible for all the processes of its execution. For example, a washing machine achieves its task, sorting it out into stages, which it does without the participation and control of the person. If such a technique is common and so facilitates the work, then why it is often possible to meet the question of how to install a washing machine under a sink?
The fact is that such a technique, combining many processes, requires connection to various communications, and in this case, such connections must be made as many as three.
First you need to buy a siphon for washingmachines and a quality extension cable. Then it is necessary to install the unit in place of its supposed location. In this case it is desirable that it is located near the sewer drain and water supply. After this, using an extension cord, you should connect electricity. This should be done in such a way that the wires do not interfere with free movement.
Next, you must connect the drainwashing machine to the sewer. For these purposes, the device has a special corrugated hose, which must be connected to the drain system. In this case, it is necessary to do everything according to the rules for installing sewerage points with the organization of the hydraulic shutter. That's why it's best to use a special siphon for the washing machine.
This device is a sewerThe knee that is installed on the sink in the sink. In this case, there is a special hole for connecting the hose of the washing machine. Such a siphon is very similar to the one used to mount a bath, but instead of a hose for overflowing, a machine is attached to it.
When doing this installation is very importantto maintain a certain height of the drain hose. It should not go above the device itself or bend over. This will greatly overload the water pump of the device, which will lead to breakage. It is also worth noting that the siphon for the washing machine also has a corrugated hose that moves away from the knee into the sewer drain. He should not bend and rise above his hole in the siphon. After making this installation, you should check the strength of all connections and their tightness. To do this, just pour a bucket of water into the sink.
When the siphon for the washing machine is installed,should take care of the water supply. To do this, unscrew the nut together with the cold water hose from the pipe. In its place a special tee is attached, to which, on the one hand, the same nut with a hose is connected (so water will be transferred to the mixer of the sink), and on the other hand a special water pipe of the washing machine is attached. When performing this operation, it is not necessary to use a sealing tape or a pack, since both connections have special rubber gaskets that can be replaced with new ones.
