The construction gun is irreplaceabletool widely used in many construction and installation works. In fact, this is a convenient and, most importantly, a quick alternative to drilling holes in high-strength substrates for various fasteners. You just need to pull the trigger so that the nail enters the thickness of the material.
The construction gun is designed to drive the dowel-nails into concrete, reinforced concrete, brick, stone, steel and other hard surfaces.
In appearance, the instrument looks like an ordinarya pistol or a small sized jackhammer. It is used for the installation of electrical and ventilation equipment, various pipelines, roofing, sanitary and many other construction and installation works. The principle of its operation is based on the use of special cartridges, the sleeves of which are colored in different colors, indicating the level of charge.
Строительный пистолет для дюбелей достаточно easy to use. Due to its maneuverability (it does not need an energy source), it provides installation of fasteners in the most inaccessible places, regardless of any weather conditions.
All manipulations using thistools are made using direct mounting technology. The construction gun for dowels works very simply: just pull the trigger, and after a couple of seconds you will get the desired result - the dowel shoots to the base reliably and very firmly. This is due to the fact that during the shot, passing through the "trunk" of the gun, the dowel is very hot due to the propellant mass in the cartridge.
Working with this gun in some casesrepresents a danger and complexity, for example, if it is performed at high altitude or in time-consuming processes. And in any case requires the presence of physical strength and skill.
But these moments do not detract from the merits of a construction gun:
A significant disadvantage is the high cost of the instrument. But once you get it, you can use it for many years.
Depending on which energy source is used, the gun is divided into three types:
Each of these species has a lock, protecting against an accidental shot. This reduces the risk of injury by ensuring the safety of the tool.
Пневматический пистолет строительный относят к the most popular kind of these tools. For its operation, compressed air is required, which is supplied from a central compressor or cylinders. Using this tool, clamps can be clogged during the installation of sound and waterproofing of the roof, the installation of stretch ceilings, as well as during the fastening of various sheet and roll materials, fiberboard and chipboard.
Gas construction gun refers totoolless tools. It is equipped with a chamber where butane-propane gases burn. As a result of this process, an explosive wave arises, due to which the dowel is pushed out and penetrates into the mounting surface. The difference between these tools is that they are suitable for working with any bases.
Пистолет строительный пороховой представляет a device loaded with special cartridges. Their design is arranged in such a way that a blow to the dowel produces a firing pin driven by the energy of the powder charge.
Most often these pistols are used in works with brick, concrete and reinforced concrete surfaces.
This gun refers to automatictools, due to which it is expedient to apply it for a large volume of construction and installation works. Its design is reliable and convenient. Thanks to its device, the through lumbago of the base is completely excluded, since the head of the dowel stops moving when the pincer is stopped.
The gun powder gun has several advantages over other types:
To any of the types of construction pistolsattached instructions for use. Before work it is required to study in detail and strictly observe all points. The main ones are the stringent requirements for ensuring tight contact between the "trunk" of the instrument and the mounting surface, as well as the exact selection of cartridges. After all, in most cases it is impossible to shoot without pressure on the fastener part, and the depth of penetration of the dowel depends directly on the strength of the powder charge of the selected cartridge.
Using a construction gun for nails, you need to use personal protective equipment:
The pistol under the construction cartridge is not a childa toy. Therefore, instructions for its operation, storage and prevention must be strictly followed. This will ensure not only safe and long work, but also will help to avoid the breakdown of an expensive tool.
The main preventive measures are as follows:
In addition to mounting guns designed for clogging dowels-nails, there are still various types of these tools, with which you can carry out a wide range of construction works.
These include guns, with which they apply sealant, glue or grout joints.
The construction gun for sealant isa tool that squeezes out of the cartridges a composition designed to seal something. Its work is based on the movement of the piston, which, acting on the bottom of the cartridge, squeezes out a certain amount of sealant.
According to the type of compartments in which the cartridges are located, such pistols are sheet and frame, and the latter are the most popular. They keep the containers with the sealant well.
Depending on the method of extruding the composition, these tools are:
In the latter version, the material is squeezed out underThe action of air when the handle is pressed. Typically, these pistols have an ergonomic design and various devices for regulating and limiting the yield of the sealant, so that it is very convenient to work with them.
The construction gun for glue has a verysimple principle of operation: the core with the adhesive composition is placed in a metal chamber, where it is heated with a thermocouple connected to the network, and after pressing the trigger through the nozzle, molten glue is squeezed out.
С помощью такого пистолета можно склеить surfaces made of plastic, glass, metal, wood or leather, dock the strips of linoleum or fiberboard sheets, repair shoes or assemble broken porcelain, seal, decorate or model something.
Construction gun for grouting isan indispensable device for jointing brickwork, clinker and other types of ceramic tiles. It makes it possible to reduce material losses, maintain the cleanliness of the surface being processed and precisely fill the seams without voids and air bubbles.
Using certain types of data pistols, it is possible not only to facilitate the implementation of various construction and installation works, but also to implement them quickly and efficiently.