During the construction of private houses and repairsapartments used a variety of materials, including insulation. For the purpose of arranging the thermal insulation today, mineral wool, foam and extruded polystyrene foam are actively used.
The latter variety isInnovative product, like "Tehnoplex" (50 mm). The material characteristics allow using it at any stage of repair and construction, so we suggest you familiarize yourself with it more closely.
Thermal Insulation "Tehnoplex" is made ofpolystyrene granules, which, under the influence of high temperature and high pressure, are mixed with a special foaming composition and graphite. The viscous mass is sent to shapes of a certain size, where it solidifies and is cut into sheets of standard parameters.
The final product is smooth and dense.The sheet structure consists of a large number of small closed cells that do not allow air to pass through. Due to this, the characteristics of the "Tehnoplex" (50 mm) are quite high. Graphite additives significantly improve the thermal insulation ability and strengthen the strength of the plates.
In the sale of products come in a rectangular package, the size and weight of which depends on the size of the material.
In order to correctly determine the necessarynumber of plates, it is necessary to study in more detail the characteristics of the "Tekhnoplex" 50 mm. How many plates in the packaging, and what they size, you can, of course, check with the seller, but it is better to have this information in advance.
So, from information from the manufacturer, we know that the described plates are of two types:
Also the insulation sheets can have different widths(from 20 to 100 mm). But since the most universal are the plates with a width of 50 mm, our article is devoted to them. In one package there are 6 plates of the same size.
Technical characteristics of Tehnoplex (50 mmthickness) indicate that this material can significantly save the budget, as it has improved thermal insulation qualities. In comparison with conventional polystyrene, the capacity of this product is twice as high, and if you look at the insulation performance of fiberglass slabs, it becomes clear that their capabilities are 1.5 times smaller.
In addition, it should be noted a number of positive properties of the material:
Despite the fact that the material "Tehnoplex" (50mm) characteristics is quite high, it still has one drawback - a bad vapor permeability. This fact must be taken into account when buying extrusion plates for certain jobs.
The manufacturer indicates the performance and other properties of the insulation on the package. Having carefully studied the instruction, it can be understood that the technical characteristics of the "Tehnoplex" (50 mm) look like this:
As can be seen, with low weight and minimalthe thickness of the material has the ability to withstand heavy loads, which greatly expands the scope of its use. It is also important that a heater of this type is not prone to decay, colonization of rodents and fungus. During operation, it does not release harmful substances into the air and remains resistant to most chemical compounds (except gasoline and organic solvents).
In what works can you use "Tehnoplex" 50 mm? The characteristics and dimensions of the material practically do not limit the scope of its application, therefore it is very popular in many works.
So, the active use of "Tehnoplex" has receivedin the insulation of facades. To this end, it is mounted on a special adhesive (by type of mounting foam). Since extrusion slabs do not lose their properties even under the ground, they are also used in the creation of a thermal insulation layer on the foundations, and as a heater of underground engineering communications.
No less active material is used in the process of interior decoration of premises. It is mounted both on vertical surfaces and in the floor screed.
To conclude this topic, let us say a few words aboutthe way in which the material "Technoplex" includes consumers. If you study a huge number of reviews, you can understand that most of the experts are attracted by the ease of mounting this insulation. They note that with his help the work on the arrangement of thermal insulation is carried out very quickly.
Many emphasize the convenience in the work thatdue to the low weight of the material and the ease with which it is processed. Among the builders, slabs are valued for lack of shrinkage and preservation of the original qualities for a long period of time. An ordinary buyer attracts a democratic price - 990 rubles per package.
Proceeding from all told, it is possible to make oneconclusion - plates "Tehnoplex" quite popular material, which has already won the sympathy of the domestic manufacturer. You can use it almost everywhere, which means that the popularity of this insulation will continue to grow relentlessly.
