Provide extra shine and protectionsurfaces are capable of enamel for the floor. They are fast drying and resistant to moisture, chemical detergents and abrasion. Application of formulations is possible using conventional techniques using a brush or roller.
The composition of the coating for wood surfaces includes solvent, alkyd varnish, persistent fillers and pigments, as well as additives that expand the characteristics.
On the surface of the enamel for the floor is sometimes formedthe film to be removed, after which the composition is thoroughly mixed. If it differs by excessive density, it is possible to solve the problem by diluting with white spirit or turpentine with subsequent filtration. For application to the painted floor, a preliminary preparation is required, which includes removing the delaminated layer and impurities, and removing dust.
Such compounds are not only coveredsurface with a wooden base. Today, you can find in the shops enamel for concrete floors, whose task is to provide protective coatings for structures in any premises, both residential and with a high level of mechanical loads (shopping centers, industrial premises, car workshops). Specialized composition based on wear-resistant additives, synthetic polymers and resins provides no damage at a significant mechanical impact.
Enamel is a modern type of paint and varnishcoating, which has resistance to ultraviolet radiation, humidity, is characterized by a convenient distribution of the composition and a sufficient degree of hiding power. This type is intended for a certain surface and provides its protection against environmental conditions.
The compositions are classified by their basis and linking elements into the following types:
The alphabetic and numerical values that can be found on the package indicate the characteristics, work features and composition.
Alkyd enamel PF for the floor is optimaloption for application on board surfaces, forming a shiny coating with sufficient hardness and wear resistance. Among the positive sides, it is worth noting good adhesion with any kind of base, including those with painted, and resistance to mechanical damage.
Disadvantages of the surface are easy to hide due to high hiding power. Imported weatherproof pigments provide lightfastness.
An important property of the material lies in itscomposition. Due to the presence of solvent and desiccants, the enamel is not affected by active chemicals and mechanical damage. Similar characteristics have a paint for concrete coatings on an epoxy basis.
Distinctive technical properties providerapid and qualitative distribution, absence of consequences when exposed to detergent compositions and some types of solvents. It is worth noting a small palette of colors, because of which the possibility of application decreases. The paint has two shades: light brown and red-brown. Because of this, the floor enamel 266 is used as a protective composition in rooms having a different decorative coating.
Enough rare acquisition of privateconsumers explains the packaging of this material, which is represented by steel banks of 40 and 30 liters. It is mainly used by large construction companies, whose profile is the decoration of premises in enterprises and dormitories.
Also before buying is worth paying attention tofor the time allowed for complete drying and consumption. The coating, consisting of two layers, is ready for use in a day. The average flow rate, provided that the surface is pretreated, is 160 g / m2. m.
Enamel for floor PF 266 is able to provide all these properties only in the case of special preparatory actions that will prepare the composition for work.
The paint should be thoroughly mixed untilachieve a homogeneous consistency with the help of a paint brush or an electric tool. To dilute the enamel, a solvent or white spirit is used in an amount not exceeding 10-15% of the total mass. Then the material is filtered through a conventional gauze, folded into two layers.
Surfaces that require staining should bebe cleaned of dirt and dust with detergents followed by washing with clean water. Then the base is polished, cleaned of the formed dust and washed again. After all these manipulations, you can start work. In doing so, you need to remember some rules that require mandatory compliance. The application of the material is carried out using a roller, which has a pile of medium length, or a paintbrush. To form a high-quality enamel coating for the floor, apply at least two layers. This will ensure compliance with the declared characteristics and a long service life.
