Современные технологии позволяют создавать новые ways to finish the apartment. One of the options to decorate the usual room is the end lights of the glasses. Carry out the procedure for installing lighting and mounting shelves under the force of anyone. And the result of the work will pleasantly surprise even the most fastidious owners.
Most often, the backlight is used for lighting:
Such widespread use leads to the rapid development of technologies and the emergence of new elements that simplify the installation and use of the backlight. These include:
End illumination has many ways to use, but the key to its popularity is the creation of fastening profiles with a prepared groove.
Aluminum profile has two important functions:
Для таких профилей подойдут полки из стекла с about 1 cm thick. If you use a shelf with a smaller thickness, then you need to use a special gasket that will compensate for the difference in thickness and firmly hold the glass in the profile.
Interesting!!! End lights glass can be used for glass stairs. It will provide comfort, illuminating the road in the dark, and will create a beautiful soft glow.
LED strip installed in the profile is notwill spread the light around the edges, it will be directed exclusively to the end of the glass, this will provide additional savings, since the light will not be scattered in vain.
Acrilight is a thin glass panel, which is engraved. For the manufacture of akrilayt are used:
The mechanism of action of the backlight is basedon physical laws. Light coming from the end is evenly distributed inside the glass. In the place where the matte engraving was applied, the light scatters and the inscription begins to glow. Acrylic glass for edge lighting well distributes light and ensures the brightness of the label.
Такие системы освещения используются в основном for internal illumination of logos. Light has a high degree of contrast and looks very impressive. Another advantage is the ability to adjust color and low weight.
The framelight is the latest invention thatis an ultrathin lighting system. The big advantage of such systems is the ability to replace the poster without any extra effort, this is due to the presence of a click system. The image that needs to be highlighted is placed inside the lighting system.
The glass backlight (framelight) has many advantages, including:
Mounting system can be done asvertically and horizontally, with hanging on the ceiling or mounted on a wall. For greater security, the framelight can be equipped with a protective screen of acrylic.
The aluminum profile has a minimum thickness, so the system is thinner than the framelight does not exist.
Luminous shelves are increasingly used inmodern interiors. They give the space originality and style and consume a minimal amount of electricity. In addition, you can arrange indoor flowers on the shelf, they will not overheat and will be beautifully highlighted at any time of the day.
Face lights glass can be mounted aspersonally and purchased in finished form, already attached directly to the end of the shelf. It is quite simple to equip the backlight with your own hands, besides there is a great opportunity to embody a unique idea.
LED strip is placed in the profile for the backlight glass. This arrangement ensures an even distribution of light.
Note!!! To make the glow more uniform, it is necessary to make the outer side of the shelf matt, and the inner one, on the contrary, to leave transparent.
Подсветка матового стекла отличается особым by design. For this, a ribbon of LEDs is installed in a profile made of aluminum, and then a frosted glass shelf is fastened to the profile. The matte surface allows light to create soft diffused lighting.
To install the backlight in the profile can be as follows:
Important!!! A plastic insert must be in the profile groove, it cannot be removed, otherwise a short circuit may occur due to the contact of the LEDs with aluminum.
Plexiglas - a material that has good sound andthermal insulation. Often a glass ceiling with lighting is equipped with it. Since there is nothing between apartments and floor slabs, the insulation is very low. Arrangement of plexiglass ceiling will solve this problem.
Before installing the ceiling glass is necessaryto prepare. To do this, using a hacksaw, it is given the necessary shape, the edges are machined and holes are drilled in them, in which later LED lights will be installed.
If desired, the glass can be applied drawing orthe inscription, then it will be highlighted, and the rest of the surface will have a soft contrast glow. The drawing is initially applied to self-adhesive paper, and then drilled along the contour in glass. A glass ceiling with lighting in the interior looks very stylish and visually makes the room more spacious.
Using the backlight of the glass surface,You can create a unique design. Ease of installation makes this method of interior decoration more and more popular. In addition, the use of LEDs saves energy and ensures maximum safety and durability.
