So that the dwelling will have a completely new look,it is necessary first of all to repair the walls. It is enough to perform this kind of work to give the whole room a completely different appearance. There is already an effect of the illusion of perception, which completely changes the atmosphere in the house. If you repair the walls with your own hands, you can avoid financial issues related to hired workers. Then without additional costs, it will be possible to update the room as a whole.
At the initial stage, the oldThe cover, which lost its former beauty and began to look sloppy. Thus, starting repairing the walls, you need to get rid of the old finish in the form of wallpaper, tiles or other materials. The operation to eliminate the first is to spray the water with a mechanical spray gun and then work with a spatula or knife. If the process takes place in a kitchen, bathroom or other places with high humidity, you will most likely have to remove the old tile. To help in this case comes a punch, chisel or chisel. A vacuum cleaner or a normal rag will help to remove dust from the surface.
Also, the repair of walls implies a processputtying. It is needed in order to prepare the surface for final finishing. The quality of this operation in the future will depend on the service life of the cladding. First it is important to understand which type of putty is best suited. At one time oil-glue materials on the basis of linseed oil were very popular, but with increasing requirements for ecological compatibility they were replaced by dispersion analogues. Such putties are considered completely safe. Widespread and received dry mixtures, which acquire the desired consistency when interacting with water.
While repairing the wall with your own hands involvesapplication of putty, it also requires the use of a primer before this work. With its help it will be possible to protect the surface from the fungus, and also to improve the grip. The primer itself is considered a relatively easy operation, which does not require special skills and knowledge. After some time even a beginner begins to "feel" this material and becomes able to easily bring the matter to an end. As for the consistency of the mixture, it must have a sufficient viscosity, but at the same time it can be mixed without much difficulty.
Specialists who repair walls very often,recommend at a time not to apply a layer thickness of more than 5 mm, because in this case on the putty may appear cracks and chips. Full drying occurs during the day. In the course of the work, it is not necessary to eliminate the stains and unevennesses, since in the future they can be removed with sandpaper. It is desirable after drying and grout to make again the primer and apply a corrective layer of putty, which is intended, first of all, for the alignment of small flaws. At the last stage, it is possible to finish the surface. Nowadays painting of walls, allowing to achieve magnificent aesthetic results, is very popular.
