The choice of finishing the door when installing a few moretens of years ago was limited. Now you can choose a clypee for this interroom element, you can either. Manufacturers produce a wide range of products, while for a particular task a strictly defined clypeus will fit. They have several differences: the material, the method of installation and purpose. An interesting solution for any interior will be a telescopic clypeus.
Platbands of entrance and interior doors distinguishaccording to the functions they perform: decorative or constructive. The latter aim is to close the gap formed between the wall and the door frame. They are installed directly on the box. The decorative ones create a visual aesthetic, creating a harmonious transition between the door opening and the wall.
Even with all the variety of materials, the tree does nothas lost its significance. It is environmentally and universally. Casing of it will fit any type of box. The advantages of wooden elements include the possibility of further restoration, namely painting, puttying, varnishing and so on. More often a telescopic clypeus is made from wood.
These elements have a beautiful appearance andmost often they mimic a tree. MDF coating can be different, but basically it is paper laminating. This outer layer is very afraid of humidity, therefore it is undesirable to wash it, because even a slight moisture penetration, for example, when washing the floor next to the door, can worsen the appearance of the clypeus.
Plastic is most recently used as amaterial for the clypeus, but has already gained popularity. This was due to its moisture resistance and cheapness, as well as a variety of colors and shades.
Elements of door framing from ceramics area specific option, which is often used for interior decoration of the entire room under the stone. Therefore, they are of a decorative nature, and their popularity is low due to limited use.
Platbands of telescopic type have their ownThe name is due to the way they are attached to the door box. They are laths of curved shape over the entire length. One of the edges is bent at an angle of 90 degrees and forms a form in the form of the letter "G" on the cross-section. This curved edge will be mounted in the groove of the door. Telescopic fastening allows to adjust the width of the door frame to the width of the wall within 8-15cm.
The standard width of the box is 7 cm, and the walls are often wider by several centimeters, so they use special extensions that push apart the telescopic platbands.
The minus of the telescopic casing trunks can only be called their high cost in comparison with other options.
Clypeus telescopic, the photo of which is presented below, as well as simple platbands, can have a flat, rounded or shaped shape.
Sometimes the doors are produced with ready-made fittings,including platbands. This eliminates possible errors, installation errors. The technology does not allow the use of special types of fasteners. Installation of telescopic trims in this case is much easier.
Telescopic doors initially assume a groovefor installation of lintels. These grooves allow the installation of decorative elements even on walls that are not aligned vertically. This is achieved because the mold is tightly attached to the surface. The telescopic panel can go in addition to the platband, it is attached to it with a special veneer and allows to give aesthetic appearance to the opening of any thickness.
The design of telescopic casing does not allow them to move in relation to the door, so the uniform geometry is preserved. The installation of such platbands does not require additional measurements and tools.
Often the masters ask themselves:how to install telescopic platbands? Even an inexperienced person will easily cope with the installation if he has an idea of the design of the door frame and the functions of the platbands. The type in this case will not play a big role.
When installing telescopic trimsit is necessary to pay special attention to the place where the fasteners of the door hinges cross the grooves. In this case, the protrusion of the clypeus needs to be cut to the required depth by any available tool.
Before installing any casing, make sure that the walls are leveled. Otherwise, a gap is formed between the platbands and the wall, and this inevitably spoils the appearance.
Telescopic clypeus, the size of whichdepend on the opening to be ennobled, they are made to be 6-8 cm wide. The length of the two parts is 220 cm and the upper one is 120 cm. The shelf that is inserted into the groove can have a width of 1 to 4 cm.
Installing the clypeus at the opening is important,which requires maximum accuracy of measurements and accuracy during the installation. By observing these conditions, you can achieve a quality result that will guarantee the uniqueness and completeness of the interior. If you install a box containing all the necessary elements in your kit, you should carefully read the instructions provided by the manufacturer - this will eliminate the incorrect installation or deterioration of decorative elements.
