A workbench for the garage will allow to equip the workingspace, and also make it as comfortable as possible. If you manage to create such a structure, the place will become ergonomic, which will guarantee an effective and safe operation.
No matter how constructiveThe features described will have the design, it should be a desktop that has a rather impressive size and excellent stability. These qualities are necessary in order to be able to process products and structures with a variety of dimensions.
When designing it is necessary to remember thatthe parameters of the processed products will depend on the features of the workbench, while working both manually and mechanically, in the latter case, electric tools such as a planer or a drill are used. If you make a workbench for a garage, its typical layout should include some elements, among them - stop, bolt slot, upper support bar, upper end lintel, square head bolt, lower end lintel, leg, shelf, vise, laid on sponge, hanger, front lintel. As for the last element, it should be located not only on top, but also on the bottom.
The working surface of the structure shouldto be made using solid wood, it is necessary to choose the one that has a thickness of 60 millimeters or more. In order to make a cover, experts recommend the use of hard wood, among them beech or oak. If you use this advice, then the described elements will not have to be changed periodically, due to the excellent durability of the material. It is important to take seriously the manufacture of vices, which are intended to secure the processed elements and parts.
Large vices can be made from wood, andsmall ones are preferable to use with metal. An important part - bench supports, they are intended to improve the quality of the stability of the structure. Their connection should be made using longitudinal strips. To work on them, it is desirable to use soft wood, such as pine or linden. When making a workbench for the garage, drawers can be installed in the space below the work surface. They are mounted on supports and are intended for storing tools and any other working accessories.
When will you developproject, it is necessary to take into account all the design features, among them - stationarity or mobility of the structure. If you decide to give preference to a portable workbench, then the most suitable solution will be weight reduction due to the appropriate material, which should have a less impressive thickness. Mobile workbench for the garage is modified using a collapsible tabletop, as well as folding-type legs.
You can make a mobile workbench thatwill be intended for minor manipulations and repairs. Most often this design is used by craftsmen who process small pieces of wood. A stationary table can also be made, it is used for processing more massive blanks and heavy boards. It is rather simple to make, and it will be necessary to install it in one place, in which it will remain in use. The design can be collapsible, it is convenient to use, because you can replace individual elements.
If you decide to make a workbench for the garage, thenit is necessary to choose its location correctly. It should be near the light sources, it is desirable that they be natural. Local light sources need to be installed. Do not forget that there should be located near electrical outlets. All wires that will be in the working area must be protected by a box or a corrugated pipe. Before you begin to build the product, you must determine the final height of the working surface. To do this, the master must lower his hands, and then place his hands parallel to the floor. The distance between the palms and the floor will determine the height of the working surface. Due to the fact that the workbench is most often designed for one workplace, the table length is best done within a meter and a half, as far as width is concerned, it should be equivalent to 0.8 meters.
If a workbench for the garage will be madewith your own hands, it is important to choose the right materials, as they will determine the stability and strength of the structure. The best option is the planed timber, which is perfect for the manufacture of legs and frame frame.
For legs, it is preferable to usebar, the cross section of which is equal to 100x70 mm, whereas the lintels will be made of material with a cross section of 100x50 mm. For the manufacture of countertops is recommended to purchase boards, whose thickness is equal to five centimeters. It is permissible to use a solid canvas, it can be an old wooden door or a chipboard. Well, if its surface is laminated. It is better to give preference to wood species by type of beech, maple and oak.
Drawing of the workbench for the garage, presented inThis article will allow you to decide on the dimensions and design features. However, it is important to remember about the technology of work. Initially, you will need to assemble the base, after the installation of the table top begins, at the final stage the equipment is mounted on the work surface.
Основание представляет собой деревянную раму, installation which is made in such a way that the product turned out the most stable and tough. This is especially important since the table will be subjected to heavy loads. To do this, between the legs you need to provide for the installation of jumpers, which will be located horizontally. In the middle along the length of the construction it is necessary to establish a ration. These elements should be fixed in increments of fifty centimeters from the floor surface. Subsequently, they can be used to strengthen the design and for the installation of shelves, as well as boxes.
Bars, which will lay down in the structure of the base,it is necessary to fix it with the help of a “tongue-and-groove” connection, whereas in areas where such a lock cannot be secured, self-tapping screws should be used. Initially, you need to prepare the spikes and grooves, following the existing drawing. Only after the sizing of the joints is carried out using wood glue. When stationary benches for the garage are made, the photos of which are presented in the article, one or several sides can be fixed to the wall surface, this will guarantee even more impressive stability of the structure.
Когда изготавливается верстак для гаража своими hands, drawings help the master to do the work without making mistakes. Constructing a tabletop, do not forget that it should turn out to be somewhat larger than the base itself. A massive shield should be constructed from the boards prepared in advance, long nails should be used for fixation, they should be driven from the inside of the boards, which prevents debris from entering the existing slots. For worktops, materials based on pressed chips should not be used. This is due to the fact that it does not meet the requirements for sustainability.
To the table top you need to nail a few bars,which will be located across. For their attachment it is necessary to provide for the presence of grooves in the base. To jumpers using screws you will need to fix the slats, which will be located horizontally. They are required to move the boxes. The table top should be fixed with bolts to the base. To do this, using a chisel in the upper part of the foundation bars, you need to make a recess, while holes are drilled in the table top to install the bolts. The heads of the latter will need to drown by drilling holes of the required diameter. In order to avoid injuries from splinters in the course of subsequent work, the tabletop must be polished several times, and then coated with drying oil.
Вы решили изготовить верстак для гаража своими hands? Photos of such structures are presented in the article. At the last stage, you can install the equipment. To the table top you need to strengthen the vise, for the installation of which it is necessary to provide for the presence of recesses in the end. In the place where the vice will be installed, from the bottom side it is necessary to strengthen the plywood. Fastening must be done with nuts and bolts. This element should not be located on the edge, which will contribute to the displacement of gravity in the process of work. Locksmith workbenches for the garage, as a rule, also have wooden clips. If there is a need, you can install a circular saw and grinder. It all depends on the needs of the master.
Rarely made metal benches for the garage. Such structures are more expensive, but more durable. The master should decide which material to use.
