Today many townspeople, probably, would likeHave a dacha or a private house on the territory of which there is a well-groomed lawn and attractive paths. If there is no possibility to allocate an impressive amount from the budget, but there is a desire to equip the exterior of the site, it is possible to make a vibrating table for the production of tiles, which will create material for arranging the tracks.
The described construction is simple, it is simpleIt is indispensable for the independent manufacture of paving slabs. This device will allow you to produce products of different shapes, whereas as the material should use a concrete mixture.
Do not assume that the vibrating table can be purchasedonly in specialized stores. You can make this design yourself. The upper plate, which is attached to the steel base by means of a movable joint, acts as a base. Among other things, you need an engine that will drive the surface.
In the process of vibration plates from molds that are filledconcrete, bubbles come out. This is the only way to ensure the proper quality of the product. When making vibrating tables for paving tiles with their own hands, it is necessary to ensure an ideal evenness of the table top. It should be smooth, and the engine used is to ensure uniform vibration.
To carry out the work, a steel pipe ina quantity of 4 pieces, a sheet of metal that will form the basis of the countertop, as well as a metal spring - it will become a mobile compound. The master needs a corner with dimensions of 50 x 50 mm, which can be replaced by a profile profile. Take care of the presence of an engine that will have the right power. When the vibrating tables for paving slabs are made by oneself, specialists prepare a welding machine, a drill, and also a Bulgarian. To install the engine will need bolts in an amount of 4 pieces.
In spite of the fact that the vibrating table is a simple design, in the course of the work the technology described below should be guided.
The basis on which to be fixedcountertop, should be made from a corner or a channel. The dimensions of the vibrating table can be completely different depending on the desire of the master. We will take the standard dimensions, which are limited to 700 x 700 mm. If you decide to use other dimensions, then remember that they must match the power of the engine used.
When the vibrating table is made for pavingtiles with their own hands, masters use pipes that act as legs. They should be welded to the base. In order to ensure maximum stability, the steel plates must be welded to the legs and reinforced with concrete. If this step is excluded, the table will move from place to place during use, while the stability of the structure will be in doubt.
The height of the table should be chosen individually,However, it is important to ensure the convenience of working with the structure. Among other things, the engine must be at a certain distance from the ground. If you are making shakers for paving tiles with your own hands, then in each corner from the central part you should weld the springs. Those parts that are borrowed from a moped are ideal for carrying out these works. Preliminarily, they need to be cut in half.
A sheet of metal should be placed on the spring from above.Use material that has a thickness of eight millimeters or more. Bolts are needed for fixing to the engine sheet. If you follow these recommendations, you will be able to produce a table that will help produce up to 60 square meters of products within a day.
Before you make a vibrating table with your own hands,it is necessary to think which engine will be used. It is quite suitable for this one that is borrowed from a washing machine. Despite the fact that it works properly, it has a significant shortcoming, which is short-lived. Such a motor can withstand only about thirty work cycles. After this, the axle is wedged or the bearing jams. That is why there is an opinion, expressed by domestic masters, that such engines can not last long in conditions of high loads, which turn out to be a vibrating table.
Alternatively, you canuse a vibrator brand ИВ-99 Е for 220 volts. It is sold in stores of the corresponding goods for 6000 rubles. Such a design copes quite well with the tasks assigned to it.
Among other things, it is important to prepare a drawing of the vibrating table, it will help to complete the work correctly.
If you draw up a similar scheme, then inIt should be indicated the location of the AC potentiometer, which will regulate the vibration force. In the process of changing the voltage level, it will be possible to adjust the oscillation frequency for a certain type of solution used. However, many craftsmen, thinking about how to make a vibrating table with their own hands, decide to save using only the engine.
It is important to make such a table that will notonly strong, but also sufficiently resistant to vibration. Only in this way will the structure be able to undergo the loads exerted. The motor must be installed in a specific location. Sometimes it can only be determined experimentally. The worktop will consist of a rectangular frame and a steel sheet. It is sometimes equipped with an additional frame on which the source of vibration is strengthened. Springs for the vibrating table will provide a limited mobility of the countertop, so their choice should be approached seriously.
In addition to the springs mentioned above, it is permissible to applyLoops made of a strong bundle. The rope will do. Four of these joints, located at the corners of the base, will allow the centered platform to be centered. When choosing a vibration motor for a vibrating table, you should consider that it should not provide an excessively strong displacement of the table top relative to its original position. Otherwise, it will not be possible to rule out the pouring of the solution, which was distributed according to the forms. That is why it is recommended to pre-examine the factory models.
