Previously met only in sawmills manuala circular saw. How to choose a model of such equipment, many private masters are already thinking today. If you also decided to acquire such a device, it is important to consider the main characteristics, among which, for example, the power supply.
Most often saws work from networkelectricity, but on sale can be found and battery analogues. It is also important to decide under what brand the saw is released, the most popular today are Makita, Bosch, DWT, Hitachi, but they will cost more than the Sturm, Sparky and Zenith models. If you also need a hand-held circular saw, which one to choose, you should decide before visiting the store. This equipment is designed for convenient and fast cutting of almost any soft material, namely wood, soft metal and plastic. As for wood, you can cut all the products from it, and moving the cutting element is permissible both along and across the fibers. All models of circulars provide the ability to perform a cut at an angle of 45 degrees.
Review of circular saws with reviews will allow youUnderstand which way to tilt the choice. When buying the described device, you need to determine why this tool is needed. If you have to carry out construction work in a large volume, which provide for the cutting of parquet and chipboard, then you should pay attention to professional models. If you do housework in rare cases, and most of the time the equipment is in the pantry without work, then it is advisable to buy a household circular.
Frequently enough for the most accurate andquick saw is used hand saw. How to choose from those presented in the store, you can understand by reading the article. Thus, the difference between professional and household tools lies in the resource and engine performance. In the manufacture of one or another kind of equipment used materials and parts of different quality. At lower power, discs of not so impressive diameter are used, which is why the device is able to cut the material into a shallower depth. The hand-held circular saw, the choice and reviews of which are presented in this article, can be a household saw. In this case, the engine will have to rest from time to time, the equipment will need to be turned off to cool.
If you need a hand-held circular saw,Which one to choose, you can decide by reading the recommendations below. If you use a professional model, then for 1.5 hours of continuous work, you will be able to cut a number of pieces of chipboard, which will be enough to assemble 4 cabinets. If you use the usual household model, then the same work will take 2 times longer. The quality will remain on top, but the cost of a professional tool will be 2 times higher.
Often enough during construction workmanual circular saw required. Tips for choosing recommended reading before making a purchase. The aforementioned model is a powerful saw that can be used for cutting large wooden blanks and other materials. The model is designed for active operation, has a high wear resistance and is characterized by a large set of functions that ensure safety in the process. How to choose a hand-held circular saw? Parameters are the decisive criterion. Below about them will be discussed in more detail.
One of the most important parameters ispower, which in this case is 2100 watts. The cutting depth is 100 millimeters, and the rotation speed is equivalent to 3800 rpm. The size of the circle used is 270x30 millimeters, the weight of the device is 9.4 kilograms. For more convenient work, there is a soft start function that provides accurate cutting. Safety is guaranteed by an instant stop of the engine due to an electronic brake.
Оборудование оснащено прочной и надежной литой aluminum support base. The operator will not face the problem of a disk jam, as there is a riving knife in the device. Safety in the operation of such tools is paramount, in this case it is ensured by the protection against accidental start-up, which became possible thanks to the switch with a fuse.
The main features areergonomic handle, due to which even a novice can handle the tool. Including also therefore it is the most convenient to use a saw at the decision of household tasks. The master will be able to easily replace the saw blade thanks to the key and fixing the spindle. It is not necessary to acquire the key additionally, as it is included in the package. It will be possible to work with the equipment at home, as it is characterized by low noise and vibration.
This reliable and inexpensive circular saw hasdust extraction device with a special adapter that connects to the vacuum cleaner. With this feature you can keep your workplace clean. Gears of a reducer are made of material of the increased hardness and durability which differs in wear resistance and the long term of operation.
Производитель позаботился о том, чтобы работа it was facilitated, it became possible also thanks to a practical cable clamp. Among other things, it eliminates damage and coagulation of the cable. The disk size is 190x30 millimeters, the number of teeth is 24. At an angle of 90 degrees, the operator will be able to go deeper into the material by 66 millimeters, and as for 45 degrees, the cutting depth will be equivalent to 48 millimeters.
Quite often in the process of repairor construction work need circular saw manual. Which one to choose, you decide after reading this article. The consumer must take into account the fact that the tool may have a motor of different power. With higher engine parameters, equipment will be able to cut material and high density products in a short time. The operator will not experience difficulties when cutting. Even knots in wood are not afraid of a powerful engine. But low-power circulars have a significant advantage, which is expressed in low weight. Thanks to this tool can be moved from place to place. Thus, models with a capacity of 2000 watts or less will weigh approximately 7 kilograms. If the saw is characterized by a power of 1200 watts, then the weight will be reduced to 4 kilograms. Do you need a circular saw for domestic tasks? Which one to choose? Price is an important factor when buying. For private use, models from 1000 to 1200 watts are excellently suited. If the tool will not be used professionally, the power reserve will remain unclaimed. From this parameter will depend on the cost of the product, the difference in price can reach 100 percent or more.
This equipment, whose power is700 watts, characterized by 4300 rpm. The cost of the tool is equal to 3,700 rubles, the bore diameter is 16 millimeters, the cutting depth is 40 millimeters. If you need to perform a straight neat cut in a tree of any breed, you can use this model. Despite its modest characteristics, this equipment has other impressive advantages, among which are ergonomic design, comfortable handle, compactness and light weight - 2.4 kilograms. To prevent accidental launch, the instrument uses the power button lock. Increased stability is guaranteed by a large metal wide support. To store the key has a special compartment.
Если вам понадобилась циркулярная пила ручная, what to choose, reviews will allow to understand. Among the popular models can be identified above, to pay for which will have 9200 rubles. The price is due to high power, which is 1800 watts, as well as an impressive cutting depth of 60 millimeters. The bore diameter is equivalent to 16 millimeters, the maximum speed reaches 5000 per minute. This saw is a professional device and is designed for cutting wood to a depth of 60 millimeters.
The tool has a high levelsafety and ease of management. The first feature is provided by a casing that protects the user from chips and dust. This equipment can be used not only for professional purposes, but also at the summer cottage, as well as at the construction site or in the carpentry workshop.
According to users, this is a good manualCircular saw is universal, as it can be used for cutting wood of different density. Users especially like safety, it is expressed in reducing the risk of injury. The operator can change when working range from 0 to 50 degrees. Users emphasize that when operating the equipment, they get an excellent overview of the cutting line, because the design is ergonomic.
If you prefer autonomy, betterJust choose the battery model, but you should be prepared for lower performance. Among other things, the rotational speed will also be much lower than in electrical circulars. Such models excellently cope with wood of small thickness and low density. As practice shows, the battery charge may be enough for 30-50 minutes of work, then the battery will need to be charged. This can cause some inconvenience, as charging sometimes lasts up to 4 hours.
To pay for the model will have 10 000 rubles.The equipment can be used in de-energized buildings, which most often concerns construction sites. The rotation speed is 5000 revolutions per minute, and the diameter of the circle used is 165 millimeters. The weight of the tool is small and is equivalent to 3.2 kilograms. Among the features can be distinguished adjustment of the angle of cutting and cutting depth. The wizard will be able to quickly replace the disk. The tool is equipped with a magnesium base bearing, charge level indicator, as well as a built-in backlight. The operator will be able to connect the vacuum cleaner to keep the workplace clean. During operation, it will be possible to use one or both hands at once.
