Ceiling whitewashing: how to avoid unnecessary problems

Ceiling whitewash is compulsory for repairapartments. This is a quick enough way to give the room signs of renewal. For this task, no serious financial investment is required. Whitewashing the ceiling with your own hands is an inexpensive way to put the room in order.

In our technological age there is a hugethe number of possible options for decoration, however, whitewashing is a leading way. The freshly painted ceiling will look good and can easily be combined with any interior. The whitewashing of the ceiling is quite difficult on its own, however, this is not an excuse to give up this idea. Even if you are doing repairs for the first time, then when you follow all instructions, you will be able to do this work yourself.

Correct whitewashing of the ceiling will be achievedonly with the correct preparation for work. It is necessary that the surface is thoroughly cleaned, because rust or other contaminants are very clearly visible through the white color. First you need to remove the old coating, for this it is enough to walk on it with warm water and a scraper. After cleaning, carefully inspect the surface for external contamination. Rust can be removed with the help of warm water, however, after this, apply a solution of copper sulfate to the treated surface. To remove fatty traces, a light clean cloth, moistened with a solution of soda, will work.

If there are defects on the surface, they must be repaired with a putty and a primer. Due to careful alignment, the whitewash of the ceiling will pass to "hurray."

After you zashpatljuete all irregularities andcracks, you should go to the primer. It is necessary that the surface becomes smooth, and also covered with a thin film, beyond which the paint can not penetrate. Initially, it is better to use a brush when applying a primer to hard-to-reach places. After this, you can proceed to the treatment with a roller or paint sprayer. Before beginning the next stages of repair, it is necessary to give the primer completely dry.

It is worth noting that when preparing to whitewash youcollide with a huge amount of dirt, so it's better to take out of the room valuable things, and cover the floor and furniture with a film. In doing so, do not forget about safety, be sure to wear glasses and a respirator.

Once the preparatory work is completed, theend, you can go directly to whitewash. There are two options: whitewash the ceiling with water-based paint or chalky option. At the base of the water-based paint there are no toxic substances that allows it to bleach living quarters. All paints of water-emulsion groups give a good white shade, and they are quite simple in application.

The most traditional and budget option is the chalk whitewash. For it, a solution of white chalk or limestone is used.

Selecting the right technology is necessary independing on the material. It is worth noting that if you apply lime mortar with the first layer, then it should be the second layer. If you use the chalk solution as a second layer, then the stains will remain. Whitewashing ceilings - a process that should start from the window.