It is safe to say that it is correctmatched materials and high-quality installation will ensure the reliable and long-term operation of plastic windows. Even the best design can be damaged by improper installation. Initially, it is necessary to dismantle the old window profiles. The window opening must be completely freed with a perforator, and also free of gaps and depressions. After the completion of these works, you can proceed to installing the windows. Allowed mistakes and negligence during the execution of this procedure in most cases lead to the fact that the windows quickly fail. The technology of installing plastic windows can be divided into several main types.
The simplest version is as followsway. First the window is arranged in the opening, and the seams are filled with polyurethane foam. Then the external connection is fixed to the mechanical connection and the window sill is installed in the opening. The final stage of the work is the collection and removal of construction debris. This technology of installing plastic windows includes additional insulation. For this, foamed polystyrene is used, which increases the level of heat and sound insulation in places where the window sill is installed.
A more complicated type is installation with steam andwaterproofing. For this purpose, a suitable tape is used, which is fastened from the outside of the window, closing the mounting seam of the opening. It is designed to protect the mounting foam from moisture and improve the heat-insulating qualities of the slope. The vapor barrier tape should be placed inside the opening.
After the construction of the window structure instructionThe installation of plastic windows also includes the installation of additional parts. These include window sills, shutters, shutters, blinds and gratings. The technology of installing plastic windows takes into account the presence and installation of all these additions even at the stage of measurements in order to prevent the appearance of errors.
Improve the thermal insulation of windows cancorrectly made slope. Its finish is done using carefully selected building materials. Perhaps additional warming of the space between the trim and the slope will be required, so that it is not a place of cold penetration into the house.
Work must begin afterthe final drying of the mounting foam. First you need to apply a cement cushion on top of the free end of the waterproofing tape, over which to mount the tide. The window sill should be mounted on mechanical fasteners, after which a special foam should be applied under it. Next, the technology of installing plastic windows implies the laying of a heater under the material of the slope. Installation of finishing materials completes the process of decorative works.
