The pistol is made of wood ... How much in this combination of wordschildhood memories ... Memories of how very young boys and girls chased each other, imagining themselves robbers and those who are catching them. Robbers "shoot" from the simplest toys from a simple piece of wood, they become the first pistols, the first toy weapon made by own hands. This article will talk about how to make a gun made of wood.
If in childhood you just took a suitableform a piece of wood, then now you can use special tools and make a toy that is almost identical to real weapons. If you perform the gun correctly, it will even be able to shoot. Self-made pistols made of wood can please not only boys, but their fathers.
To make "weapons" will need:a wooden block, a piece of a rubber bicycle chamber, a drill with a drill no more than 6 mm, a well ground knife, a saw, a file, a nest, a knitting needle or the same length of a nail. To understand how to make a gun made of wood, it is worthwhile to know that the design of this product is divided into three elements: one-piece handles and trunk, pistons and rubber bands.
First of all you will need to make the barrel and handle of the gun. They need to be cut from a wooden block. The bar in the thickness should be at least 2 cm. You can choose any shape.
We continue to answer the question of how to makea gun made of wood. In the ready-made barrel with a drill, make a hole for the entire length. The completed hole must be carefully sanded with sandpaper. To do this, the paper needs to be rolled into a tube and put on a suitable stick, a long nail and a knitting needle are suitable. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, in diameter a little less than 6 mm. On one part of the piston should be a small thickening. This end will be called a whisper. The piston must be the entire length of the barrel and freely enter and exit it. On the thickening you need to attach the elastic band. Her or tape should be cut from a piece of bicycle camera. Instead of a wooden rod, you can take just a long nail. His hat will serve as a whisper. The nail itself should be cut along the length of the trunk, and the place of the cutoff should be well sanded with a file to finally blunt it.
The finished piston is placed in the barrel of the pistol,At the same time, it is necessary to stretch the rubber band on the handle of the weapon. The whisper will need to be adjusted in such a way that when pulling it back, the trigger is raised. It should also be done so that it can catch on the ledge on the handle of the gun. At the same time, the piston will be fixed firmly in the cocked state. The pistol is made of wood.
Shoot from this design is this way:The pistol is taken into the hand, the thumb of the hand pushes the whispering upward, it slides and moves the piston along the trunk. If you do not know how to make a gun out of wood, then this article should help you achieve an excellent result.
