With the help of decorative plaster cantransform not only the walls, but also the ceiling. This part of the room is one of the most important. After all, it plays an important role in the perception of the interior. With the help of the described composition it is possible to achieve interesting textures that allow you to form unique patterns on the surface.
If you have no idea how it will belook decorative plaster on the ceiling, you can be sure that the appearance of the base will be exactly as you want. As one of the important advantages of this material is the ability to take any relief. On the shades and not talk. After all, you can create your own version of the tone.
Decorative plaster applied to the ceilingdifferent from the usual composition of grain. The basis may be small stones, wood and any material suitable for creating a characteristic relief.
If you started decorating the ceiling with decorative plaster, then you must first understand its varieties. The mixture can be attributed to a particular group depending on:
Water may serve as the base.or solvent. Consumers are more interested in the type of filler. After all, it determines the appearance of the future coverage. Textured plaster is the most popular in the line. The filler in it are wood fibers, chips of mica and minerals and small pebbles. The presence of these ingredients turns the surface into a true masterpiece with a three-dimensional effect. Thanks to this, the room literally comes alive.
Ceiling decoration with decorative plaster canprovide for the use of the Venetian composition. It is suitable for those who like to combine new technologies and classics. Venetian plaster will not look pretentious. She is elegant, natural and able to emphasize the impeccable taste of the owners. This composition creates masterpieces. However, they will be restrained. Mostly made in classical or antique styles.
Когда осуществляется отделка потолка декоративной plaster, photo home masters necessarily considered. Visual perception allows you to understand which type of composition is best to choose. Among other offers of the market one should single out a structural mixture, which some experts consider to be a subtype of textured plaster. In some ways, this opinion can be considered truthful. After all, the composition is made using crumbs of quartz, minerals and stones.
Однако у структурной штукатурки есть одно главное the difference that is expressed in the uniformity of the surface. The composition contains elements of the fine fraction, which gives the coating a special texture that resembles the bark of wood.
If you want to make repairs usingenvironmentally friendly materials, you should consider plaster plaster, which is truly beneficial to health. The mixture will not be embossed, but from it you can create at least attractive masterpieces. Gypsum gives the material plasticity and is characterized by its ability to level.
Such a competitor is a silkplaster, which can also be called natural. Components include silk fiber, cellulose of natural origin and decorative additives. This decorative plaster on the ceiling looks great (you can see the photo in the article) perfectly. The binding element of the mixture is glue. An alternative name is liquid wallpaper.
To prepare the solution for application is very simple. To do this, it should be combined with water. But the application will be a pleasure. After all, silk plaster falls, "like a native."
If you are ready to start exploring the wisdom of working with plaster, then first you need to prepare all the tools and materials. Sometimes in home bins can be found:
The room is well protected.The master should change into a special suit and wear safety glasses. It is recommended to lay a film, fabric or newspapers on the floor. After all, a drop of solution is quite difficult to wash. It is important to properly prepare the foundation. For this, a layer of lime or old plaster is removed from the ceiling if it is damaged.
The base is leveled, and after itprimer is applied. If you are thinking about the question of how to apply decorative plaster on the ceiling, you should know that you must first prepare a solution. This step is excluded if you use the finished mixture. But the dry composition is diluted according to the recommendations in the instructions. The final consistency should resemble homemade sour cream.
Before applying decorative plaster ondo-it-yourself ceiling, you have to prepare it. The surface is cleaned with a spatula. Additionally, you can use a brush for metal processing. After that, the surface is primed in several layers, between each of which a four-hour interval should be kept. The surface of the ceiling is leveled. At the initial stage, the threads are tightened for this, which are set using a laser level. This markup will eliminate height differences and reduce the consumption of expensive material.
For surface preparation can be usedany plaster composition. It is combined with water and mixed with a construction mixer with a nozzle. After the leveling layer hardens, the ceiling is primed, which increases the adhesion of the material to the future coating. After the coating dries, you can start decorating.
For the application of plaster can not be usedonly a spatula, but also treadmills. Finishing alignment is carried out with a polyurethane grater. If in the process of this wet the surface, then you can achieve a polishing effect. When applying decorative plaster on the ceiling, you can create a variety of effects, such as the type of shell. To do this, using a float on the surface, it is necessary to carry out circular movements. After the layer dries, the plaster is coated with wax to protect the surface and give it a glossy shine. This treatment will facilitate the care of the base.
Putting decorative plaster on the ceilingIt is carried out by means of the pallet on which it is necessary to type a small amount of solution. The mixture is spread over the surface with cross-strokes. This must be done smartly and quickly. After all, the composition quickly freezes. You need to start from the corner, following along the wall.
As soon as you applied one strip of material,it is necessary to proceed to the second, moving in the opposite direction. It is better to handle small areas, because the frozen surface will not allow to modify the texture - you have to redo everything all over again. The main thing at this stage - to have time to work figure roller. This should be done before solidification of the final layer. After applying the plaster is left for a day. Then the surface can be coated with glaze or paint.
If you want to trim the ceiling decorativeplaster in the kitchen, you must remember that the final coating will depend not only on the type of composition, but also on the size and shape of the granules. If you want to get a relatively smooth surface, you should purchase plaster with fine particles.
If it is necessary to create a surface with an abundancedrawings, you should buy a composition with large granules. If you want to form transverse or circular grooves on the ceiling, you should prefer oval-shaped plaster. Round particles will help to achieve a rough, uniform coating.
This method of applying plaster is morechallenging. However, the result will be much more spectacular. The structure of the rain is best formed under the slope, but this recommendation is not critical. Before you start applying decorative plaster on the ceiling, you should mark it. Slanted lines are drawn on the surface, the width of which is 3 flushers. Lines must be at one angle. It is quite difficult to do this at the joints. The masking tape is stuck on each line so that the bottom edge is on the line.
The plaster is applied with a layer of 3 mm.The length of the strip should be 1 m. To create the structure of the drops, the ironer should be pressed slightly to the surface and stretched along a line in a raised state. These actions are repeated until you can cover the entire strip. Putting decorative plaster on the ceiling, at first you will see that the texture is more like a hedgehog. In order to fix this, it is necessary to smooth the surface. Gladilka cleared of material and pressed to the solution. The tool must be held in one direction. At the same time, one edge of the trowel rises so that it does not completely cling to the surface.
Before you start work, you mustcover the walls with a primer and apply a layer of putty: this will eliminate gaps and improve the quality of the coating. To apply the putty on the walls, you need to choose a small area of up to 0.5 m2. The solution is collected on the tiller, and afterdistributed over the surface. The mixture is smeared with a layer up to 3 mm. A coarser texture is obtained by increasing the layer. The solution is distributed on the wall, and then you can begin to create a structural pattern.
Гладилка очищается от материала и прижимается к the wall. This can be done by any side of the tool, but the bottom edge of the trowel is raised, at the same time you have to make a downward movement. This will create a texture in the form of small irregularities on the solution. When you tear the surface of the trowel from the mixture, it should be done as smoothly as possible so that no traces remain. Drawing of the invoice can be carried out movements cross-wise or a herringbone, horizontally or vertically.
After each treated areacleared so that the excess solution does not spoil the texture. Then you can proceed to the next zone. However, it is important to eliminate spaces. To do this, apply the composition overlap. Decorative plaster walls and ceilings, in principle, is performed using the same technology. At the next stage, it provides for waiting time, which is necessary for the surface to dry. It will take about a day, and then you can proceed to staining.
Нанести декоративную штукатурку на потолок вы You can do it yourself by trying to create one of the selected effects. Among others, we should highlight the “rock” and “rain”, which were discussed above. At the final stage, the surface of the plaster must be primed, and then painted.
But for the second and subsequent layers of primerno longer needed. Putting a monochromatic paint, you must be prepared for the fact that the texture will be lost, and the result will not be the most successful. To highlight the structure, use the two-color method.
