Every modern car is equippedspecial heater (in simple words, stove). It serves to effectively heat and maintain the desired temperature in the cabin. The car "Lada Kalina" is equipped with an oven with an automatic control system. Thanks to it, you can adjust the temperature to within 2 degrees Celsius. In winter, we constantly turn on the heater, so in order not to freeze in the car, you need to constantly check the condition of the radiator through which warm air passes and spreads throughout the cabin. In this article we will consider how the Lada Kalina car is replaced with a heater radiator.
Causes of breakage
First you need to find out, because of what the stove stopped working. Basically, the supply of warm air to the cabin stops due to a leaky hose or a hammered radiator.
Instructions
We note at once that replacing the radiator of the stove with"Kalina" will take you 3-4 hours of time, and maybe even 6. Therefore, before starting work, plan your time so that you do not quit this job. Among the tools we need a cross and a minus screwdriver, as well as a set of wrenches.
So, let's get to work.Replacement of the heater radiator on the "Kalina" begins with the detachment of the negative battery terminal. This is done in order that then there are no short circuits. Next, remove the lining of the windshield frame. Next, disconnect the fan and unscrew the bolt securing the vacuum hose. The last detail is set aside. Then, carefully pull on the spring clips that secure the air intake housing. This is done with a minus screwdriver. Then we proceed to the most difficult and responsible step - we are looking for fixing elements of the front case. This is very difficult to do, because for this you need to completely remove the instrument panel and unscrew the heater fixing screws and lift it slightly. Now we must have a screw to fix the air intake housing.
Then remove the body and disconnect the steamhose from the union. To do this, we need to loosen the clamps. Now it's a little thing - remove the furnace cover and take out the radiator. In order to remove the last part from the fasteners, unscrew the 3 bolts in the middle of the front panel and another screw located on the left under the noise insulation. The last one is slightly pulled from the edge and unscrewed the necessary part. Now carefully remove the stove and proceed to install a new one. Replacement of the heater radiator on the "Kalina" is done in the reverse order.
After the new part is installed, do nothurry to turn on the heater. First check the coolant level. Add the required level if necessary. Now the replacement of the radiator of the stove at "Kalina" is finally completed. You can safely start to operate.
How much does the replacement of the radiator of the stove "Kalina" cost?
The price for similar work varies from 2.5 to 5 thousand rubles. As you can see, the savings on the services of service centers are significant.
