VAZ-2114 is a very popular car in Russia.Despite the way out of serial production, the machine is actively used by our compatriots. One of the main advantages of this car is high maintainability and cheap maintenance. AvtoVAZ still produces spare parts for this model. The air filter for VAZ-2114 was not an exception. We will talk about it in our article.
As you know, to work the engine you need a certain portion of fuel. But without oxygen, the duty cycle does not happen. Therefore, gasoline is pre-mixed with air.
The latter is absorbed from the atmosphere. But we all know that the air in the streets is full of dirt. Therefore, in order not to damage the motor, a filter is provided in the car's construction.
After the exhaust stroke, the piston in the cylinders movesin the bottom dead center. The engine generates a vacuum. In this case, the timing mechanism opens the valve through which oxygen enters. And he literally sucked into the cylinders, because the pressure in them - below the atmospheric.
On turbocharged engines, air entersForcibly. But we are considering the design of the 14th "Lada", where there are no turbines and compressors. So, when creating a negative pressure, air penetrates through the pores of the filter. They are small enough to cleanse oxygen from dirt and dust. Then it passes through the branch pipe of the air filter VAZ-2114 into the intake manifold. After that, the air is already mixed with fuel and injected into the cylinder.
There are two types of described elements:
What is this for?The thickness of the paper in the zero resistance filter is much smaller. Therefore, the air is not able to clear normally, passing through its pores. In this regard impregnation is provided. Thanks to it, dirt adheres to the outer walls of the filter. It does not penetrate further into the engine. For greater rigidity, this element can be reinforced with a grid.
The manufacturer claims that the replacement of airfilter on the VAZ-2114 should be made every 15 thousand kilometers. But these data can still vary considerably, depending on the operating conditions. So, in winter, the filter is already polluted by 7 thousand km. Therefore, it is better to replace it at the same time as the oil. Experienced motorists recommend doing this operation with an interval of 10 thousand kilometers.
Also note that the air filter on VAZ-2114is an expendable material. It does not make sense to blow it - it's a useless occupation. The element changes entirely to a new one. Moreover, its price is only about 150-200 rubles.
But as for frameless "zero-pointers", theymust be cleaned. It is done once in 10 thousand kilometers. But you need to know how to do it right. You can not simply remove and rinse the part under water. This will not give any effect.
At first the element is processed by a specialimpregnation (on dry, without soaking). Then you need to wait for time (usually 10 minutes) and rinse the element in the water. Reprocess it with impregnation is not necessary. After drying, the element is ready for reuse.
But note that the FNS should be installed only after complete drying, otherwise the water will fall into the cylinders. To speed up the process, you can use a home hair dryer.
If you do not change the air filter for a long time on the VAZ-2114, the following problems may arise:
When the filter is clogged, the machine stops normal"to pull". Of course, this does not please the car owner. Therefore, you need to follow the mileage. After 10 thousand the car requires replacement of both oil and air filter.
It is worth noting that the replacement procedure is quite simple, and even novices will cope with it:
At this time, the replacement of the air filter has been successfully completed.
Performing any repair operations orservice, write down all the actions in the logbook (usual notepad), indicating the type of work and the mileage at which they were made. It is very difficult to keep everything in your head - sometimes you can forget about what distance the filter, oil and other consumables were replaced.
Sometimes when replacing, you can see traces of oil on the surface of the filter.
This is a bad sign. In this case, the following problems are possible: