In summer, the sultry weather is so desirable to be wornsome light and casual clothes. The idea to sew a summer skirt independently appeared in the mind of no girl. But the search for patterns and other schemes, lack of experience could stop this idea even before it was implemented. If you already have experience in sewing, then the self-design of the summer skirt will not be too complicated for you. To do this, you need to remove three basic measures: the length of the future product, the semicircle of the waist and the semicircle of the hips.
Front linen skirts
In order for the pattern of the summer skirt to be madequalitatively, it is necessary to remember the main points. It is required to construct a right angle and denote the vertex by the letter "T". From it down you need to postpone the measurement of the length of the model and put "H". From the top of the corner is measured 19 cm (for any size of the skirt). This point should be designated by the letter "B". This will be the length of the hips. From point "B" and "H" you need to draw horizontal lines of hips and bottom to the left. For the width of the skirt from "B" the measure of the semicircle of the thighs is postponed. To it should be added a certain amount of centimeters, depending on the freedom of cut. This point should be designated "B1" and draw a vertical line through it. It must intersect with horizontal lines. The intersection points are "T1" (upper) and "H1" (lower). To construct a lateral line from "B", half of the hemisphere of the hips and additional centimeters of freedom of cut are deposited to the left, as well as a couple of centimeters for widening the front part.
Back skirt of the skirt
The pattern of the summer skirt, namely its back,occurs as follows: the width of this part is 1/4 of the waist semicircle minus 2 cm, plus 5 cm and plus 1 cm from the "T1" to the right. This point is designated "T7". From her up you need to count 2 cm and put "T8", which will need to connect the straight line with "B2". From "Н2" to the right it is necessary to measure 6 cm and put the point "Н5". It must be connected to a straight line with B2. From "H5" up along the line "B2H5" should be postponed 1 cm. This point is designated "H6". Subsequently, it must be connected to "H1" by a convex line. The dart is built in the same way as the tread of the front cloth.
Conclusion
Models of skirts with patterns are currently foundnot so difficult. But if you decided to do it yourself, then, hopefully, this article will help you a lot. If you want your product to meet all the nuances of fashion, then you should look and compare the periods of all skirts - the spring of 2011, 2012 and 2013. This will help determine your preferences and take into account the current trends.