Despite the fact that the shelves of modern storesfull of all kinds of dolls, cars and robots, homemade toy is of particular importance for children. With his own hands, a child can make a lot of original and unique things from the improvised material with the help of an adult, which will take his attention not only during the game, but also during production. In addition, the original crafts can be a great gift for a child's birthday or any other holiday.
Recently very popular amongchildren, and even adults, began to use various toys made of rubber bands, so this material will most certainly be found in your home, and you can weave a doll out of it with your child. In addition to the multi-colored Rainbow loom, you also need to prepare a weaving machine and a hook.
Для начала работы инструмент необходимо place in such a way that its middle row is pushed forward one column in comparison with the others. Start making dolls with her hair. To do this, on the extreme row of the machine should wear gum, pairwise combining the first column with the second, the second with the third and so on. This action should be done until the desired length of the curl is reached. When you decide to stop, on the last column with an elastic band, you need to wind in three turns another element of the same color, from which you will need to pull out a single elastic band and hook it to the rear column. Such actions should be done with all the elements, after which the lock should be removed from the machine, hooking the first loop on a wooden stick or a spare hook. These elements need to be done two or four, depending on what hairstyle the future doll will have.
Next you need to make sleeves T-shirts andhands for the doll - these two elements are better to do with rubber bands of different colors. Begin with sleeves. To do this, two rubber bands put together combine the two columns of the extreme row of the machine. Next hands. Two folded gum should be thrown on the second and third columns, then two more - on 3 and 4. After that, the last should be wound gum in four turns. Next you need to throw the elements on the machine in the same way as in the manufacture of curls. After that, the finished part can be removed. Handles, of course, for this toy of rubber will need two.
After making all the additional elementsYou can start weaving the main part. To do this, two rubber bands need to combine the protruding column with the extreme left, and then the other two - with the extreme right. Then, similarly, it is necessary to put elastic bands on 1 and 2 pegs of all rows - this will be the upper part of the doll's head. Now face. The central row is covered with a pair of rubber bands twice, and the last row - one at a time. Then, to round the head, it is necessary to combine the extreme columns with the prominent middle. Now you need to fix the hair. To do this, the previously woven elements should be thrown over the extreme upper columns - two for each. It is important not to forget about the eyes of the doll. To do this, on the second columns of the extreme rows of the machine should be screwed on one rubber band in four turns. Next on the same protrusions, as well as on one middle row, located a little lower, you should throw another element through which you can remove the "eyes" and move them to the center. Then another gum should be thrown in a triangle, combining those columns where the "eyes" were previously, and one of the middle row, which will also become the top of the second triangle, and its corners at the base will be the columns below.
Now you can go to the neck.To do this, on that column of the middle row, where the head ends, and on the one below, you should put on two elastic bands. Then in two directions diagonally from the place where the neck ends, it is necessary to put on two elastic bands - these will be the shoulders. Then for each row should throw another pair of similar elements. And then attach the previously made pens to the appropriate places. Below from the T-shirt you need to put on three pairs of rubber bands for each row to form a skirt. After this, four pairs of rubber bands should be thrown over the extreme rows of the machine - these will be legs, without which a toy with its own hands cannot be completed from the improvised material. On the last columns of the legs you need to twist the gum in four turns. Now, in the field of skirts and T-shirts, you must wear a single triangle elastic band. Thus, all rows will be merged. Next, in a familiar way, it is necessary to remove the gum from the machine, - first the left side, then the right side, and then the center. In the joints of the neck with the shoulders, the backstrap should be done to the central pillar, the situation is the same with the top of the doll. Through all the layers of the “top” of the toy one more element should be threaded and tightened onto the eyelet. After that, the product can be removed from the machine and used for the game.
If your kid likes stuffed toys, fromKapron tights and padding polyester, you can make for him a magnificent snake. For the product it is best to use things of bright colors, then the finished crafts will look more original. It is necessary to begin work with cutting off one "leg" from tights, - it is important that it be whole and without puffs. Further, in the area of the sock, on its upper part, buttons should be sewn, which will play the role of the eye.
Из красного фетра понадобится вырезать язычок для future snake (more interesting is the forked element) and sew it on the appropriate place. To complete the manufacture of soft toys from nylon pantyhose, the prepared “leg” must be tightly stuffed with padding polyester, and tie the end of the product into a knot or carefully sew. Such a snake will be an excellent addition to the collection of your child, especially since he can take an active part in its manufacture. It is worth noting that it is possible to make such simple toys from fabric, after having sewed a cylinder from it.
Игрушки из цветов, изготовленные собственными hands, can be a great addition to the main gift for the child to whom you come to the feast. To create this extraordinary crafts you will need a floral sponge, wooden skewers or wire, water, a stationery knife and, of course, fresh flowers of the shades in which the toy is planned to be made.
Having at hand all the materials, you can proceeddirectly to the creation of the product. To do this, cut out the figure of any animal from the floral sponge using a clerical knife. If you can’t create it from a single piece, you can cut each part separately, and then combine them with wooden skewers or wire. Cut out the figure should be lowered into a container with water and maximally sate it. This is done to ensure that flowers from flowers are stored longer.
Теперь необходимо подготовить главный материал.Buds need to be cut, leaving 2-3 cm of the stem. Next, the flowers should be evenly inserted into the prepared sponge, avoiding gaps. At this stage, the color scheme of the toy is fully formed. Sometimes you have to use shades that are not at hand. In this case, you can use the spray paint. At the final stage, you will need to attach the eyes to the toy (they can be drawn on paper and cut) and the nose (candy can be used to make it). If necessary, the finished crafts can be decorated with additional elements - decorative bugs, butterflies, ribbons, etc.
Despite the fact that today you can buy the mostvariety of toys for the Christmas tree, you can be sure that your child, and the rest of the family, will be delighted with unusual decorations made with their own hands. After all, they will be not only beautiful, but also edible. We are talking about Christmas toys from sweets. For their manufacture will need metal cookie cutters, oven, baking sheet and a sheet of parchment paper. Since toys will be made of candy, then this product will also be needed - it should be caramel, better multicolored. In this case, the finished toys will look more interesting.
So, the sheet must be covered with parchment andplace metal molds on it. Next, you need to fill them with candy in the order that you like, and place the leaf in the preheated oven for 3-8 minutes. The process must be monitored and stopped at the right moment - when the candy has already melted, but it is not yet burnt. After removing from the oven, you should cool the caramel a little and carefully remove the molds. After that, with a wooden skewer, make a hole for inserting the thread, for which the toy will be hung.
Using plastic bottles, acrylic paints andWhite spray can, you can create very funny penguins. To begin with, it is necessary to cut off the lower halves of two plastic bottles and insert them into each other in such a way that a completely closed container is obtained. Next item must be covered with white paint and wait for it to dry completely.
When the item will be ready for furtheruse, it is necessary with the help of paints and brushes to draw all the details of the fabulous penguin - eyes, beak, tummy, back, scarf and cap. At the final stage of creating a bottle of toys on the top of the penguin cap, you can attach a pom-pom.
It turns out that snowmen loved by all childrenYou can not only sculpt from snow in winter, but also make these toys from threads at any time of the year. For this purpose, you will need to prepare 5 balloons, PVA glue, a gypsy needle and cotton threads.
First you need to inflate the balls - they mustbe of different diameters - the largest for the base, a little smaller for the middle, even smaller for the head and very tiny for the arms. Then, after threading the needle, you need to poke a tube of glue in its lower part. This is done for greater convenience in future work, because you need to use a thread, smeared with glue. Next, you need to wind each ball, - this should be done in different directions. After that, all parts need to be dried. Then the ball in each of them must be punched and gently pulled out. After that, all the elements should be glued together in the appropriate order. However, the toy is not yet ready. With your own hands, you need to make a snowman's face out of improvised material or specially acquired elements, after which you can use it for its intended purpose.
When it becomes necessary to take a childa new interesting game, homemade finger toys from the boxes can be a great way out. Making them does not take you much time, and the child with their help will be able to create a whole puppet theater.
So, you need to take a rectangular box andcut it in half so that the bottom wall remains intact. Then the received details should be pasted over with a color paper. After folding the box in half, the mouth of the toy will turn out and all that is needed is to glue the eyes drawn and cut out of paper. That's almost ready new original toy. With your own hands from the material at hand, it remains only to give the figure a special appearance - by drawing or gluing lips, teeth, tongue, hair, ears, - depending on what character you want to get.
Если вы хотите удивить и порадовать своего child, create for him toys from eggs, watching which he can imagine how ducks, chickens, dinosaurs and many other animals are born.
For the manufacture of crafts will need a shelleggs, in which a small hole is made in the upper part, small plastic or rubber toys. The shell should be placed in a tray, put the animal inside, pour water and put it in the freezer. After complete freezing, remove the top layer and hand the toy over to the child. For a more interesting effect, you can place the manufactured egg in a transparent container with water and watch the process of the "appearance" of the animal.
