/ / Palm of a plastic bottle with their own hands is easy and simple

Palma from a plastic bottle with your own hands is easy and simple

Palm of a plastic bottle, with their own handscreated, simple and at the same time elegant decoration for the children's playground and infield. To tasks of increased complexity, its construction can not be attributed in any case. Each novice master can deal with such a thing. To do this, you just need to follow the instructions outlined above, and you will definitely succeed.

Palm of a plastic bottle with your own hands

Prepare in advance

The palm of a plastic bottle is made with the help of the following materials, devices and tools:

  • Knife stationery.
  • Scissors.
  • A set of plastic containers of different volume and colors (bottles with a volume of 1.5 and a maximum of 2 liters are best suited).
  • Wire.
  • Pipe 1/4 (suitable for both metal and metal plastic).
  • Pliers.
  • Side cutters.
  • Marker.
  • Ruler.
  • A sledgehammer or a hammer.
  • Awl.
  • Lekalo (needed at the stage of cutting out the green leaves of the tree).
  • Electric drill and set of drills for metal.

All this is better to prepare in advance toa beautiful palm tree made of plastic bottles, made by your own hands, started flaunting as quickly as possible on your backyard or playground where your kids play.

Palma from plastic bottles scheme

Preparatory work

At the first stage we make palm leaves fromplastic bottles. To produce them we need a template, a marker, a clerical knife, an awl and plastic green containers (in the extreme case, you can use a container and another color, but then you will need to cover them with green paint). Further we make a marking on the container surface with the use of a marker and a template (if desired, we can make a template out of paper and then use it for these purposes). On the marked marking, we cut out the leaves. To further fix the obtained parts on the trunk of the tree, make holes with an awl. At the next stage we proceed to the trunk. Here we need a similar set, only with the difference that brown containers (or a different color, but at the end they will have to be opened with brown paint) will be needed. All bottles, except one, are cut off the bottom. In the lid an opening of this diameter is made,

Palm leaves from plastic bottles
so that the pipe passed. For these purposes, a drill and a set of drills for metal are used. In a single whole bottle, an awl is prepared for the holes for fastening the leaves.

Collecting a palm tree

Now proceed directly to the creationthe very craft. First you need to use a hammer or a sledgehammer to hammer the pipe into the soil. It should be very firmly installed, in order to exclude the fall of the tree in the future. Bottles with a cut bottom are put on it. The latter should be put on a whole container. Then a green part of the tree is attached to it with the help of wire, pliers and side cutters - leaves. To avoid possible injuries, the ends of the wire are wrapped with tape or tape. Everything, our palm from a plastic bottle with our own hands is made. As can be seen from all the above, there is nothing difficult to create such an article. You just need and time. With the rest of the problems should not arise.

Conclusion

This article describes the algorithm usingwhich can be made a palm from plastic bottles. The scheme is simple enough, and each master will cope with it regardless of the level of his preparation. As a result of the work carried out, an excellent decoration of the site for children or the infield will be obtained.

Liked:
0
Popular Posts
Spiritual development
Food
yup