This article will be described in detail and in stages byInstalling the HP LaserJet P1102 Printer. In addition to this, its real technical characteristics and cost will be given. All this will allow the potential buyer to decide on the choice, and the new owner - set it up and start using it for its intended purpose.
HP Laser Printer This model belongs to the printing solutionsentry level. First of all, this is indicated by a fairly democratic value. But the additional arguments in this case - the average quality of output documents and the minimum set of methods for connecting. Also, this positioning of this product is indicated by the fact that its monthly print resource does not exceed 5000 pages. As a result, this peripheral solution is perfect for creating a printing subsystem in a small office with a workstation of no more than 10. It can also be successfully used in a workgroup with a similar number of PCs. Another possible area of its use is home. In all other cases, this laser printer must be supplemented by another printing device, because its monthly volume for printing will certainly not be enough.
HP Laser Printer This modification is completed as follows:
Printer HP P1102.
Initial cartridge with a filling of 70%.
Power cord.
Disk with application software and electronic versions of the documentation for this peripheral device.
Quick guide to setting up in paper form.
Warranty card.
The manufacturer did not include the documentation in the documentationan interface cable that connects to the PC's system unit. This accessory will have to be bought by the new owner separately and at an additional cost.
Sufficiently solid, both for laserprinting solutions of the entry level, the HP P1102 specifications. As noted earlier, it is based on the laser method of obtaining prints. Therefore, the print quality in this case is low enough, but it is more than enough to output text information, tables and diagrams. You can also expect to receive pictures in a mediocre quality. The pluses of this method of printing include a large print volume for 30 days - about 5,000 pages for HP P1102, and a speed of 18 pages in one-sided execution for a minute. In addition, it should be noted that the costs of consumables and accessories in this case are minimal. The maximum size of the page for printing is 210x297, or the most common format currently available is A4. In addition to this, it is possible to print on pages of arbitrary size: setting up the printer it allows you to do it without any problems. The density of the print paper should be in the range of 60 to 160 g / m2. The method of connection in this case is one - USB 2.0, but you can use for this purpose other compatible modifications of this universal interface.
This printer is a manufactureris positioned as an entry-level product. As a result, the cost of it should be very, very modest. Indeed, the price tag of this printer is quite democratic - 5000 rubles. This cost entirely corresponds to its parameters and specifications.
Installing the HP LaserJet P1102 Printer begins by removing it from the box. This procedure consists of the following stages:
Using the pointers on the box, determine the location of the device.
With the use of a clerical knife or scissors, we cut the packing tape in this place.
We remove from the box the peripheral laser printer, the cartridge and all the rest of the "stuffing".
We remove the locks from the printer, which ensure its safe transportation.
The next step is to install the HP LaserJet P1102 printer to a permanent place. As noted earlier, this peripheral device can only be connected to a personal computer or an intelligent router using a wired interface USB. Both in the first and in the second case, all functions of the print server are assigned to the nearest PC or router. Therefore, the printer should be as close as possible to such a server. The maximum allowable cord length for such aconnection - 2 m. After installing the printer using a power cable, connect it to the AC power supply, and using the interface cable - to a personal computer or router.
The next step is to install the cartridge in the HP LaserJet P1102 printer. To do this, remove it from the protective cover.Then open the front panel of the printer. In the next step, carefully install the cartridge inside. In the initial configuration is a cartridge model CE285A with a print resource of 500 pages. After refilling, this number is increased to 700 one-sided sheets. There is also an improved modification of this cartridge - its model CE785D. In this case, you can expect to print 1500 pages from one of its refueling.
Next, the HP LaserJet P1102 printer setup program should be started from the CD. Further, following the instructions of the setup wizard, we perform driver installation. Wherein setting up the printer will be conducted in automatic mode, andAny actions from the user should not proceed, except those that will be requested by the master. Typically, at this stage, the printer turns on.
The next step is to print a test page andVerify the printer is operational. Put the page in the feed tray. Then on the included PC go to the menu "Start". Then choose "Control Panel". In it we find the icon "Printers" and open it. In the opened list we find НР Р1102 and we call its menu the right button of the manipulator. Then select the "Properties" item. Then on the "Home" tab we find the button "Test page" and click it. If done correctly, the test sheet prints. Otherwise, you can say that the installation of the HP LaserJet P1102 printer failed. It is necessary to find out the cause of this malfunction. It may be that the printer is disabled or the driver is on USB - ports are not installed. In general, it is necessary to conduct a comprehensive diagnosis of the computer system and find a malfunction. Then remove it and repeat printing the test page.
In this material, the HP LaserJet P1102 printer was installed. There is nothing super complicated in the above algorithm, and each user of a personal computer can do this operation.
