When buying a new computer or a new onespeaker system often raises the question of how to connect headphones with a microphone to your computer yourself. In this operation there is nothing complicated, with it everyone can easily cope.
Connectivity
Before connecting headphones with a microphone to thethe computer itself, you need to find out what type of interface is used in the speaker system. To date, only two types of connection interfaces have found widespread use:
The first is preferable, becausethe sound quality is an order of magnitude better. Yes, and the cost will be lower. The only case where the use of acoustics with a USB interface is justified is the absence of the first option or its inoperability. It is important to pay attention when buying the first type of speaker systems for one moment. If you buy only the headphones, then there will be one pin for switching, and when you purchase the device with the microphone there will be two of them. Most often, each of them is painted strictly in a certain color. The microphone is orange, red or pink. The speakers, in turn, are painted in green. There are times when there is no color marker. In this case, logos with appropriate designations must be made on them.
The next step is how to connect the headphoneswith a microphone to a computer, you need to look at the back of the system unit. There should be round nests with a color design with an edge. As it is easy to understand, each pin is installed in the same color socket. For more confidence, you can navigate through the logos, next to the connectors. But devices with a USB interface have only one rectangular contact. It can be connected to any socket.
Customize
This stage of how to connect headphones withmicrophone to computer, fully automated and does not require human intervention. Usually, when a new device appears, the system itself is reconfigured. As a result, a message will appear that the connector was connected. If this does not happen, then you need to clarify the correct installation of connectors. In case of correct switching, it is necessary to check the sound card drivers.
Testing
At the final stage, you need to checksystem performance in general. For this, it is better to use third-party programs, for example, Skype. Its convenience is that you can check both the speakers and the microphone at the same time. Naturally, good headphones with a microphone will sound better. But with an inexpensive speaker system, incidents are possible.
conclusions
Within this material, it has been described howConnect headphones to the microphone without assistance. There is nothing complicated in this operation. With her, without any problems, every user can handle, regardless of the level of his preparation. The main thing is to follow the algorithm given earlier. If, after connecting, the acoustics does not work and the switching is done accurately, you need to diagnose the drivers that organize the operation of the sound card.
