PSP 3008 Firmware: Tips, Warnings, Recommendations

The PSP 3008 gaming platform is one oflatest generations of interactive gadgets. It is distinguished not only by better performance, but also by an increased level of protection. Firmware PSP 3008 to the latest version is not only technically difficult, but also in case of failure, it can only be restored in a service center. And only for the money, even with a valid guarantee.

Requirements

In order for the PSP 3008 firmware to be successful, some conditions must be met. Remember that their implementation is mandatory, and failure to comply with these rules may adversely affect your gadget.

1. Before flashing, charge your PSP to at least 80%. When the battery is low, the process can automatically end in the middle.
2. During the installation of custom firmware, the device must be connected to a power source to avoid the problems described above.
3. Find out the version of your current firmware. If she is 6.39 and below, then you can install a permanent firmware, if above, you will have to install a temporary (virtual) version that will crash at the first full reboot of the gadget.

Также мы хотели бы вас предупредить о том, что не responsible for this instruction. It was tested on several devices, but you can never be 100% sure that everything will work as it should. Installing any unlicensed software, even if it is the PSP 3008 firmware, is a violation of the service agreement with Sony, and the warranty will no longer be valid.

6.60

The most current firmware PSP 3008 - 6.60. It provides the most stable operation of the device and the launch of most programs. So how to install an update for the platform?

1. Download the legal system version 6.60 from the official site.
2. Transfer all files to the device's memory card in the /PSP/GAME/UPDATE/EBOOT.PBP directory. Create it if necessary.
3. Download the device and run the PSP update from the "Games" menu.
4. Wait for the process to complete.

So you update the firmware of your PSP to the official version 6.60. If you want to run pirated games, then additional modification is also required. To install it, do the following:

1. Download modified firmware files.
2. Put them in the root of the memory card of your "memory bandwidth".
3. Enable LME Installer 6.60 using the Games menu.

That's all.At the end of the process, you can remove the installer. Now you can enable LME Launcher 6.60 in games to run a virtual environment (pirated firmware). After that, you can safely run pirated applications.

6.61

Если вам не хочется каждый раз дрожать по поводу charge the battery and worry about what flies firmware, you can try to "fix" the virtual firmware. How to do it? This operation will require firmware PSP 3008 6.61, as well as some additional programs.

1. Install the virtual firmware as described in the paragraph above.
2. Download and upload to the root of the memory card utility 6.61 Infinity Firmware Builder.
3. Run it from the "Games". Select "Build Hybrid Firmware".
4. Using a PC, we transfer the DATA.MFC file from the / PSP / GAME / MAKER / folder to the / PSP / GAME / FLASHER / folder.
5. Download and run 6.61 Infinity Firmware Flasher.
6. Reboot the console.
7. If you turn on the blue screen, agree to restore.
8. Remove the "builder" and "flasher".
9. Check the firmware version in the settings. At the end of the inscription should be a sign of infinity.
10. Now you can install a pirated system version 6.61. This is done in the same way as before.
11. Download and run Infinity Bootloader Configuration. Push left and cross, choose our firmware - PRO CFW.

Now your virtual PSP 3008 firmwarefixed, and you do not have to constantly include it. Problems with the search for additional software should not arise, since the utilities of the infinity series usually run in one archive.