Often after reinstalling softwaresecuring (or installing a new one), the computer detects new hardware — the PCI Simple Communications controller. Despite the fact that all external and internal devices have already installed drivers, the diagnostic program says that the specified device does not work correctly. This problem occurs on personal computers whose motherboards are manufactured by Intel, and the Simple Communications PCI Controller hardware is a product of Management EngineInterface (Intel ME). In this article, we will discuss how to fix this problem.
As stated above, this problem occurs.when reinstalling the operating system. This is because many manufacturers create separate drivers for each OS. So, if the Millennium program was installed on your computer, and you installed XP, then many devices (modem, sound card), most likely, will not work with those drivers that were supplied on the optical disc with them. There are also specialized operating systems, for example, for gamers, the XP version (GAME 2007), in which there are no integrated drivers, since they were removed for ease. From all of the above, we can conclude that the cause of the failure is either incorrectly installed software, or its absence altogether. It means that in order for our equipment of the Simple Communications PCI controller to start working, it is necessary to install a driver for it.
В первую очередь необходимо установить конкретную your hardware model, including the Simple Communications PCI controller. To do this, find the documentation for the device. If you have not saved the paper that you were given in the store, then look carefully at the optical disk with drivers: very often, manufacturers point to the surface of the equipment model. If here you have suffered a failure, then you need to remove the computer cover and find the marking directly on the device board.
In the next step, we need to find and downloaddriver for PCI controller Simple Communications. It is best to take the software on the official website of the manufacturer of this equipment, since there you can find the latest version of the necessary software. In addition, such drivers are always installed correctly, which will allow us to spend a minimum of time and effort in the future. If you were unable to find the software yourself, you can write to the support service of your equipment with a request to send a link to the necessary software.
So, we got the necessary softwaresoftware, it now remains to install it. To do this, you first need to remove the failed device from the system. Go to the control panel, then to the system and the device manager. Choose "remove PCI controller" and restart the computer. After the operating system boots up, the new device manager will detect the uninstalled hardware and request a driver for it. You must specify the location where the required software is located and restart the computer again.
That's it, the device is ready for operation.
