Crosscut saws are usedbuilders for cutting the workpiece. The design of the device allows you to choose the angle. The main material for the work is wood or aluminum. However, plastic and laminate can be cut easily.
All miter saws stand out for high speed.turns. At the same time the cut will always be very neat. All this allows to use this tool in installation, and also joiner's works. However, some use it to finish the room.
Additionally, saws can be used infurniture production. Still often they are adopted by the enterprise for the production of windows. This is largely due to the high quality of cutting metal profiles. The disks of the miter saws are extremely durable.
The miter saw with broach consists of a protectivecasing, engine and handle. At the base of the device there is a bed with a rotary table. Under it you can see the ruler, which allows you to set the angle. Additionally, a longitudinal stop for fixing the workpiece is placed in the miter saw. The installed casing protects the person from the rotating disk. In turn, the miter saw with a broach, made with your own hands, is not safe. Many manufacturers install asynchronous motors on devices. However, many prefer collector devices.
The first option will allow you to work with the workpieceabsolutely silent. In this case, asynchronous motors can last for many years. Collector devices are much noisier. However, they are easy to maintain and do not require periodic inspections. In general, the location of the engines can vary greatly in different models. Most often, manufacturers install the engine in the back. However, it does not greatly interfere with the workflow. Additionally, in such a situation, a person has a good overview on the workpiece.
The right choice of saws depends on itsapplication. For home use, you can consider purchasing a simple modification. At the same time, the extensive functional part is not so important. The situation is different with construction professionals. In this case, it is necessary to look closely at completely different models.
Power miter saw must be at least1800 watts. Additionally, you should pay attention to the casing. With it, you can safely work with the device without risk to health. Another nuance is in the dimensions of the device. Large and heavy miter saws can have good performance, but they are absolutely not comfortable to use.
If a person plans to work continuouslya long time, then you need to pick a compact model. This also takes into account the ergonomics of the saw. The handle should be comfortable, and the workplace should be clearly visible. Last but not least, the buyer should pay attention to the device disk. Basically it is selected on the basis of diameter. A valid indicator is 20 cm.
Power consumption this miter saw withbroach "Metabo" has as much as 1.3 kW. The frequency of idling is equal to 5000 revolutions per minute. The diameter of the saw blade is 216 by 30 cm, which is quite comfortable. The depth of the cut at an angle of 90 degrees is 60 mm, and when the angle is reduced to 45 degrees, the depth drops to 45 mm. The maximum cutting height is 120 mm. Adjusting the bevel angle in this model is provided.
Additionally, it is possible to controltilt device. The dimensions of this miter saw are quite acceptable. The length is 475 mm, the height is 465 mm, and the depth is only 285 mm. The mass of the device is 9.4 kg. These miter saws prices are in the area of 6400 rubles.
Saw miter "Corvette" has a goodindicator sawing the workpiece. The supply voltage comes from the 220 V network. The power of the collector electric motor is 1800 W. The disk has a diameter of 255 mm. It is made with carbide tipped. The size of the fit disk is 30 mm. Moreover, its thickness is 2.8 mm. Directly on the disk is 40 cloves. The spindle has a diameter of 16 mm.
Additionally, manufacturers have taken care ofpipe, which is required to connect the chip breaker. In this model, its size is 37 mm. The cross cut is 75 by 430 mm. Rotation of the barrel during operation can be adjusted from 0 to 45 degrees. The inclination of the saw blade is also set in the range from 0 to 45 degrees. Transmission in this model is installed gear. Slanting cut at 45 degrees is 75 by 305 mm. At the same time, the engine rotation speed reaches a maximum of 4800 revolutions per minute.
The transport dimensions of this miter sawpretty impressive. Its length is 830 mm, height - 520 mm, and depth - as much as 415 mm. The mass of the device is 21 kg. Additionally, it should be noted good indicators of the longitudinal course. More manufacturers have taken care of quality table extenders. Replacing carbon brushes occurs fairly quickly. In general, this miter saw has good reviews. Its cost in the market is about 9,500 rubles.
Power consumption this saw mitercombined has 1.6 kW. In this case, the voltage is at around 230 V. The frequency, in turn, is 50 Hz. At idle, the drive makes 2800 revolutions per minute. The diameter of the saw blade - 260 to 30 cm.
At an angle of 90 degrees, the depth of the cut is130 mm. Additionally, it is possible to connect a dust remover. Depth spent on drink preparation at an angle in 45 degrees makes 85 mm. The total weight of this saw miter combined "Makita LH1040" has only 14 kg. Its value on the market is 15,000 rubles.
This trimming saw is capable ofboast a fairly sturdy construction. At the same time cutting accuracy is very high. The bevel value is approximately 0.2 mm. Horizontally, this broaching miter saw is able to rotate 45 degrees. At the same time there is the possibility of a clear fixation of the workpiece in a certain position.
In the vertical plane, the saw incline is 45degrees There is also the possibility of sudden engine braking. This system is equipped with a special safety switch. A screw is provided to adjust the depth of the cut.
Connect miter saw to vacuum cleaner prettysimple. The diameter of the carbide saw blade is 255 mm. Power consumption device - 1.5 kW. The voltage indicator is 230 A, and the frequency is standard 50 Hz. The thickness of the saw blade is 30 mm. At idle, he is able to make more than 4000 revolutions per minute. The depth of cut at 90 degrees is 130 mm. The total weight of the device is 14.7 kg. The indicated miter saws prices are in the region of 14,000 rubles.
This model is best suited forwork with metal blanks. At the same time it is able to boast accurate cutting. Most often, this miter saw is used for cutting molded profiles. At the same time there is an opportunity to work with non-ferrous metals, as well as steel. Spindle fixation manufacturer provided. Replacing the grinding wheel is very quick and easy.
The casing is made quite qualitytherefore, there is no health risk during operation. This is largely due to the unique shape of the casing. The carved disk is closed from the person from all directions. Additionally there is a quick-release device. Adjusting it goes stepless. The cutting angle can be changed from 15 to 25 degrees. Handle included comes built-in. In general, the model is very easy to transport.
Данная торцовочная пила с протяжкой производится with laser marking suspension. The handle has a good shape and is quite comfortable in its grip. Manufacturers produce them completely rubberized. Because of this, the disk is very easy to control in any position.
Наклон угла торцовочной пилы в горизонтальной the plane is 45 degrees. The power consumption of the device is 1.4 kW. The voltage is at around 230 V. At the same time, the model frequency is 50 Hz. Additionally, it should be noted a good idle speed. In a minute the disk makes more than 4000 turns. The diameter of the saw blade is 255 by 260 mm.
Possibility to connect a dust remover is available.The total weight of the model is 19.9 kg. A device for fixing the depth of cut is provided. Also, manufacturers have taken care of the security system. To this end, they installed a quality casing. The cost of this model on the market is 22,000 rubles. In general, this model can be described as universal. It is perfect for both large enterprises and small workshops.
