On the market for a hammam (Turkish bath) is representedmany steam generators of Russian production. Between themselves, the models differ in power, nominal voltage, size and price. Coppers, as a rule, are made from stainless steel. Valves are applied in various thicknesses.
On average, they keep the pressure at 1.4 bar.Power quality model is 12 kW. By design, the devices are quite similar. Many models in the kit have a remote with a display. There is a steam generator in the store about 70 thousand rubles.
Make a steam generator hammam do it yourselfquite simple. First of all, the camera is selected for the model. The boiler is installed with outlet pipes. The heating element is mounted at the bottom of the structure. To control the device used temperature sensors. In this case, the outlet valve must be designed for a pressure of 3 bar.
To adjust the temperature is setcontroller. It is more expedient to select fixing screws from a stainless steel. After their installation, a drain valve is installed. Further, to assemble a steam generator for a hammam with your own hands, contact jumpers will be required. At the end of the work, a hole is made for flushing the model.
The specified steam generator for the bath-hammam haspower is 12 kW. His performance is high. The boiler in this case is designed for two cameras. If you believe the experts, the temperature sensor is used high quality. The protection system of the steam generator is used series KP20.
Дренажный клапан в устройстве рассчитан на 2 бара.The control panel is made with a digital board. Mounting screws are included as standard. In total, the model has one heating element. The limit voltage of the steam generator is 230 V. The main chamber in the device is made of stainless steel. Buy the specified steam generator on the market at a price of 72 thousand rubles.
Это недорогой и производительный парогенератор.First of all, it is important to note that the equipment capacity is 13 kW. He has a heating element installed next to the drain valve. The main camera in the device is designed for 12 liters. According to customers, it is washed very easily. This steam generator in assembled form weighs 16 kg.
The protection system he uses is series KP20.The temperature sensor is available with a filter. Mounting screws are included. The boiler itself is located at the rear of the structure. The outlet valve in the system is designed for 2 bars. The control unit is provided with a remote control. The digital level sensor is located behind the main camera. Jumpers are used contact type. To buy this steam generator in our time can be at a price of 66 thousand rubles.
The specified steam generator is produced with power14 kW. The device works at a frequency of 12 Hz. The protection system of the model is provided for the KK20 series. The control unit is used with the remote control. The digital display of the steam generator is missing. The outlet valve in the system is designed for a pressure of 2.2 bar. The heating element is installed at the bottom of the structure.
The main camera is used with filters, andit is made of stainless steel. The level sensor is located above the outlet valve. Overheating protection at the steam generator is available. The system capacity is 13 kg of steam per hour. The drain valve on the model can withstand a pressure of 3 bar. The leakage protection system of the model is available. The mounting screws are made entirely of brass. Buy the specified steam generator in our time can be at a price of 78 thousand rubles.
This steam generator has two cameras.The boiler is used with a power of 10 kW. Its limiting frequency is 50 Hz. If you believe the experts, the level sensors are used high quality. The outlet valve is installed near the control unit. The digital display of the model is available. Remote control is not included in the standard kit. The leakage protection system is used in the KR202 series. The clamping screws are made of stainless steel. The plate of this steam generator is able to withstand more load.
The drain valve in the device is designed forpressure at 3.4 bar. Overheating protection system used by PP21 series. The height of this model is 512 mm. Temperature maintenance sensors are installed in two chambers. The limiting voltage of the device is 230 V. The vapor temperature at the outlet is 100 degrees. The performance of the model is quite high. However, it is important to consider that there are no jumpers in the standard modification kit. Buy a steam generator of the specified series, the user is capable of price from 80 thousand rubles.
This steam generator for hammam (Russianproduction) is done with a single camera. The outlet valve in the system is used at 2.5 bar. The working fluid is applied according to GOST 2874. The mounting screws for the model are made of stainless steel. The enclosure is used with a leak protection system. In this case, the temperature can be adjusted from the remote. The level sensor on the model is installed inside the camera. Outlet in diameter is 23 cm.
Overheat protection is used by KK19 series.This model weighs only 17 kg. Drain valve at the steam generator is designed for a pressure of 2.6 bar. The heating element is located at the bottom of the chamber. The system of protection against failures in the control unit is missing. It is possible to buy this steam generator in the market at a price of 76 thousand rubles.
The specified steam generator is made with threeby cameras. The outlet valve in the system is designed for a pressure of 2.5 bar. The performance of the device is 12 kg of steam per hour. He has a leakage protection system. The drain valve is installed in the main chamber of the device. The fixing screws of the steam generator are made of stainless steel. The threshold voltage of the model is 220 V. The level sensors are located near the outlet. Remote control in the standard set is available. Protection against overheating of the case is used KK20 series. The threshold power of the steam generator is exactly 15 kW. A user can buy a model for 75 thousand rubles.
These steam generators for hammam recentlytime is in great demand. A distinctive feature of the modification is the presence of brass valves. The outlet of the model is 2.4 cm. The maximum power of the steam generator is 14.6 kW. The frequency hovers around 30 Hz. The leakage protection system is used with the KR20 marking. The capacity of the steam generator is 13 kg of steam per hour.
Temperature sensors are installed only in the firstthe camera. The boiler in the device is made of stainless steel. The height of the structure is 540 mm. The total weight of the modification is 14 kg. Temperature maintenance sensors are installed near the heating element. The drain valve in the device is designed for a pressure of 3.3 bar. It is possible to buy the specified steam generator for 68 thousand rubles.
Do you want to build a hammam?The gas generator of this series has many advantages. First of all, it is important to note that he has three cameras. The leakage protection system is used class PK20. Temperature maintenance sensors are installed in all chambers. The boiler in this case has a power of 12 kW. It works with a frequency of 30 Hz. The mounting screws on the model are made of stainless steel.
Level sensors are located standard, nearheating element. Jumpers in this case are used contact type. The control unit is applied with a digital scoreboard. In the market, the specified gas steam generator for a hammam can be found for 88 thousand rubles.
Эти парогенераторы для хаммама продаются с котлом at 10 kW. They work at a frequency of 30 Hz. The leakage protection system of the model uses class KK20. The fixing screws in the device kit are included. In total, the steam generator has two level sensors. The control unit is used with the remote control.
If you believe the experts, the problems with failuresrarely occur. The outlet valve of the system is designed for a pressure of 2.2 bar. The performance of the device is 13 kg of steam per hour. Drain valve is used on 3 bars. The evaporative liquid of the model corresponds to GOST 2874. Jumpers are not provided in the standard kit. It is possible to buy the specified steam generator for 90 thousand rubles.
These steam generators for hammam are sold withtwo cameras. The boiler in the model is used with a power of 13 kW. It works at a frequency of 35 Hz. The leakage protection system is used in the KR202 series. Level sensors are located near the heating element. If you believe the experts, the camera is very easy to clean. Drain valve manufacturer provided for 2 bars. The disadvantages of the model include a small outlet.
Overheating protection system in the devicemissing. The outlet valve is applied at 3 bar. Mounting screws for steam generator are included. The heating element in the device complies with GOST 13268. Temperature maintenance sensors are installed in the control unit. The remote control is standard on the device. Directly cameras are made of stainless steel. It is possible to buy these steam generators for a hammam for 77 thousand rubles.
These Russian steam generators for hammamproduced with a single camera. The boiler they use high power. The model works at a frequency of 30 Hz. The temperature sensor is installed with an output flange. The system of protection against voltage interruptions is used series PP25. The camera in this case is designed for 13 liters. Modification productivity equals 14 kg of steam per hour. Level sensors are located near the boiler.
If you believe the reviews of experts, then regulatetemperature can be no problem. In total, the device uses two mounting screws. Jumpers installed contact type. The drain valve in the system is designed for a pressure of 3.2 bar. Sensors to maintain temperature are installed at the outlet. The main chamber of the steam generator is made of stainless steel. The user can buy a device for 78 thousand rubles.
