The bulgarian is an angle grinder thatis a universal tool. It will not be superfluous in any economy, because during the repair and construction work, there is always something to grind, clean or cut. Therefore, buy this tool is for every owner, but before that it is important to determine what characteristics the equipment should have. Decide for yourself what list of operations you have to perform, do not buy a tool that performs much more manipulation than it is required for you, because in this case you will overpay. Bulgarian - this is the tool with which you can cut slate, metal corner and stone. With its help, you can sand the weld seam or get rid of rust from the surface. Using this tool, the master can cut ceramic products or clean the wooden surfaces. For this it will only be necessary to change the nozzles.
Before you buy the abovetool, it is necessary to decide what materials you will most often use, what depth of cut must be provided during the work, whether you want to repair the Bulgarians during operation. Before buying, you need to pay attention to the weight of the tool, since professional equipment, as a rule, has a significant mass and is unlikely to be convenient for household use. After analyzing all the functions of the tool, you will be able to find an adequate model for yourself.
If you need a Bulgarian on wood, then you canchoose the equipment of economy class. It will cost you around 1400 rubles, but for such a price you will become the owner of a tool that does not have many important parts and accessories. Some models of this class do not provide proper reliability and safety. If you use the tool quite infrequently, and also for a short time, then this model is suitable for you. Its body is made of thin steel, but it will be able to undergo minor loads. The attachment of such a tool is carried out with the help of a yoke with a nut and a tight screw. It is strong enough, but it does not always guarantee convenience, as it will be necessary to use a screwdriver and a suitable wrench. For household use, the tool is suitable, but the engine does not have dust protection, as a result of which the fine particles of the elements to be worked will contribute to the abrasive wear of moving surfaces, and repairs of Bulgarians may be required. Metal dust can cause a short circuit.
If you are building and repairing on a commercial basis, it is recommended that you purchase a more expensive and reliable model that will have the best quality.
The Bulgarian, whose price is equal to 3500 rubles,refers to tools of the middle class. Such equipment is considered convenient and safe. It has sealing inserts and lacquer coating of the rotor, which prevents the penetration of contaminants. Such machines are intended for use in domestic conditions, they are equipped with a clamping mechanism, which allows for quick adjustment of the position of the protective casing. Such tools have convenient start buttons and react to pressing the finger of a brush in a rubber glove. Similar Bulgar, reviews about which are often quite positive, has a more impressive set of functions. It can be used by the left-hander or right-hander, since the handle can be screwed on either side. For convenience, some models of this class allow you to install the handle from the top.
Repair of the Bulgarian is most likely not useful,if you acquire a professional tool. The mechanism of such equipment is protected from dust, and has a soft start function. This ensures a gradual increase in the speed of the disk. That is why such a tool can be connected even to a weak electrical network. Instruments of this class are protected from vibration, manufacturers install on them an automatic balancing system of the working disk. The cost of such equipment can start from 4000 rubles, and the final threshold is very impressive.
The Bulgarian is the tool that followsselect by several criteria. The first is the scope of use. The second thing you should pay attention to is the number of pens. For use in domestic conditions, their number can be limited to one unit. However, if you choose professional equipment, then the pens should be two. Among other things, these components of the equipment must be rubberized.
Circles for Bulgarians can have different diameters.The minimum size is 115 millimeters. It can be used for the most simple work. The largest dimensions of the disk are 230 millimeters. With the help of it you can cut brick, pipes, plates, as well as everything that is needed. If you choose circles for the Bulgarian, which will be used at home, then in the role of the optimal diameter it is preferable to use 125 millimeters. If you are repairing an apartment or a house, you should choose a disc of 180 millimeters. The capacity of the equipment can vary from 0.5 to 2.5 kW. The choice of this parameter depends on the duration of the motor - the engine power should be enough to spin the drive.
The Bulgarian is the instrument to usewhich sometimes takes a long time. That's why it's important to take into account the availability of additional functions, among them you can select the option of smooth start. Such a system will allow the equipment to run without jerks, this will smooth out the voltage surges that arise in the network. You can pay attention to the presence of automatic disk balancing. This function will be useful for uneven wear. The system smooths out unevenness and reduces vibration. If you buy a bulgruk of sufficiently high power, then it must be a function of protection from jamming. This option will prevent the negative effects that the engine can automatically shut down. It is important that the use of such a tool is safe. For this, the equipment is protected against restarting. If the power supply has been discontinued, and then resumed, the Bulgarian should not start working independently. Pay attention to the fact that the Bulgarian has the protection of the motor from the penetration of all kinds of particles and dust.
When working with this electrical tooldo not forget that long-term and frequent overloads can cause the machine to fail. Therefore, when carrying out work, it is necessary to make periodic stops of the motor of equipment, which not only prevents possible overheating, but also eliminates the need for repair. By the way, it can be very expensive. If you want to become a holder of quality equipment, no matter what class it belongs to, it is important to ask the seller if the tool has a quality certificate. In addition, it is necessary to take care of both the warranty and maintenance throughout the life of the product. Those manufacturers who are worried about their reputation give their products a fairly long warranty, which protects the buyer from the purchase of poor-quality equipment.
