Water spaces have always attracted people, but forA variety of swimming means are used to move them. A wooden boat with its own hands can be built at home with the necessary tools, fixtures and materials. The first floating crafts were made from a solid wood trunk of suitable dimensions using the primitive technology of chiselling.
Этот способ характеризуется крайне неэффективным use of material and high labor costs. How to build a boat for more modern technology and with less loss? The detailed description looks rather voluminous and goes beyond the scope of an article describing the general principles and approaches to the process. The basis is a special waterproof plywood construction.
Dressing of a swimming device is a processlong, and it is recommended that it be carried out indoors. The roof above the head will avoid the adverse effects of solar radiation and precipitation on the materials used in the work. For work we need:
The main material of the case is a specialplywood thickness of 6 mm, and for the production of podklyuchin, cans and falshkylya need a board of solid wood. In addition, you will need special clips or threads, as well as putty and waterproof paint.
Строится лодка своими руками в два этапа, и The work begins with the cutting of the plywood sheet. Drawings must be transferred to the workpiece, you can do it in two ways. The first involves the use of special equipment: a computer and a plotter. Print out the pattern at a scale of one to one. From the cardboard we cut out the scissors with a scissors and simply translate the image along the contour, placing a sheet of plywood under it.
Во втором варианте выкройка расчерчивается parallel lines and is transferred step by step to the workpiece with a corresponding increase. All details of the boat are carefully cut using electric jig saw. The operation is best performed on a table or workbench. It should be remembered that the instrument must be promoted strictly along the line without applying excessive efforts to it.
A plywood boat with its own hands is assembled on the flooror any other even and hard surface. To the base of the contour attach the stern, the details of the right and left side and nose. The joint is made by means of special staples or a thin and strong thread. Joints are carefully glued with polymer tape from inside and outside. The base of the body is ready.
Then the wooden boat with its own hands becomes strongerwith the help of a power set installed in the bow, in the stern and in the place of installation of the can. The frames are made from dry racks and connected to the body by means of an adhesive joint. The floater is then allowed to fully dry the glue and proceeds to a responsible process for applying the putty and paint.
Making a boat will take a long time, butwill accumulate knowledge and experience. The finished product is tested in the nearest pond, and if there were no gross violations of technology, it will last for a long time to its owner. The next logical step in the development of your skills will be a real motor boat, designed and manufactured by your own hands.
