How to install a shower: process features

The shower cabin has long been in demandthe subject of the bathroom interior. The fact is that it is an alternative product that can be used in a small room. However, you need to figure out how to properly install the shower. Naturally, you first need to choose it. To do this, you should determine the type of product, its shape, material of manufacture, as well as dimensions.

If you don't know how to install a shower,you should not be afraid of this process, since it is quite simple. First read the detailed instructions that came with the product. Then decide on whether the cabin will stand in place of the bath or next to it. You may have to make certain changes to the room plan. Assembling the product is not difficult, you just need to make sure that the kit contains all the details.

So, before you install the shower,View all items. You must have complete metal racks, from which the product frame, side panels and rear wall (depending on the shape and type of construction), the roof, the door, as well as the tray through which the used water will flow, will be constructed.

In order to install the cab, you need itpre-assemble. To do this, you will need a screwdriver, silicone sealant, flexible corrugated hoses, a shower, a mixer, a drill, a construction pistol, as well as a level.

The first step is to strengthen the pallet.Naturally, before this, all flexible elements are installed that are responsible for supplying and discharging water. The best option is to place the pallet directly above the sewer hole. You may need additional support elements. It is necessary to fix the pallet on high-quality glue or cement mortar. Discharge hoses should be located at a slight angle.

Next, before you install the showerCompletely, assemble the frame of the future product. This should be done using the building level, so that later you will not have problems with opening or closing the door (especially if it is sliding). After that, you can fix the back and side panels.

For additional fixation can be processedthe joints of the frame with the frame silicone sealant, which is also an insulator. Securely fix the panels with self-tapping screws, for which special holes are provided in the profile.

Install a shower cabin with your own hands verysimple, if you do everything in accordance with the instructions. During work, try to tighten the screws without excessive pressure, so that neither the glass (plastic) nor the metal profile is cracked. Now it remains only to properly and smoothly install the door, seal all the joints and wait until the silicone hardens.

The last thing to check is the work.cabins, lights, extras, faucets and showers. If there are any problems, they must be eliminated. Now you know how to install a shower. Good luck!