/ / Fishing for pike perch and other equipment

Fishing for pike perch and other equipment

Pike perch - this is the predatory fish, hunting forwhich brings the greatest excitement. It is called a river tiger not only for striped sides. The habits of a pike perch are similar in many respects to the land predator: it hunts from an ambush, does not eat carrion, leaves the victim at least a chance to survive.

Besides, is it possible to compare his tender whitemeat with pike or with some perch? Yes, and catch the river tiger, even knowing the habitat, not everyone can. But knowing his nature, habits and using proven gear for catching pike perch, you will not leave him no chance.

Fishing tackle

Catching a river tiger can be anyan adaptation intended for fishing on a predator, but not all of them work equally well for this fish. The most effective gear for catching pike perch is spinning, dunk and predatory feeder.

Fishing for pike perch
All other designs, for example, gimmicks or mormyshka, can also be used, but it is not necessary to expect good catch from them.

Fishing for pike perch

Spinning with a well-chosen snap andbait can do wonders in catching a predator. And pike perch is no exception. Spinning tackle is very mobile, does not require a long time for tuning, and also gives the fisherman the opportunity to choose the correct wiring option in a certain place.

As a bait for fishing on pike perchtaking into account its deep-sea lifestyle, often use vibrational spoon-bait, foam fish, as well as a variety of silicone attachments such as vibro-worms, twisters, etc. The type of wiring has a huge influence on the outcome of fishing. For pike-perch, most often anglers use tweeting or jig.

The best spinning equipment on pike perch

However, neither bait nor wiring will provideA good catch if you do not give enough attention to the rigging. Pike perch is not a pike, which, being hungry, rushes to everything, and not the omnipresent perch. In addition, he lives in places full of stones and snags, and attacks the victim solely from an ambush. It is problematic to get it out of there because of the danger of breaking off the tackle.

Catching of pike perch on the branch
Catching a pike perch on a branch lead will save you fromlike problems. This equipment is also called Moscow. Why so, it is not known, but they say that they invented it in the capital. What is better than classical spinning montage?

Fishing for pike perch has the following advantages:

  • more natural bait game;
  • increased sensitivity of tackle;
  • Moving along the bottom and tapping cargo in addition attracts a predator;
  • low probability of direct hooks.

Installation of a branch lead

The design is quite simple, so even a person who is not very knowledgeable in how to mount such a tackle will be able to deal with it. The branch lead on the pike-perch consists of the following elements:

  • the main line (better woven) with a thickness of 0.15-0.25 millimeters, a length of about 100 meters;
  • self-pull leash from a monolie with a maximum cross section of 0.2 millimeters, a length of about 100 centimeters;
  • lead weight, better rounded, weighing 5-30 grams;
  • swivel-tee;
  • 2 carbines.

Catching of pike perch from the shore

To begin with, you need to cut off the main linea piece about 30 centimeters long. To one of its end through the carbine to fix the load, and the other to tie to one of the branches of the swivel-tee. To the opposite branch of the tee, attach the main line in such a way that the usual straight tackle with a load on the end and a free lateral eyelet of the swivel is obtained. To him will be attached or fixed with the help of a carbine diver leash for catching pike perch. They can be prepared in advance, of different lengths, with hooks or jig-heads, as well as with a variety of ready-made baits.

Некоторые рыболовы, охотящиеся за хищником, recommend using leashes for catching pike perch from fluorocarbon. This predator, unlike the pike, does not have the habit of snacking, but extra precaution does not prevent.

Lures for catching pike perch on a branch lead

To attract pike-perch, you can use such attachments as:

  • vibrotail;
  • twister;
  • ripper;
  • wobbler;
  • foam rubber fish;
  • zhivets, including the one who is dead (dead).

Silicone baits

Catching a pike perch on a diversion lead with the use of silicone baits, such as a vibrotail, twister or ripper, significantly increases the probability of biting, especially if the color is chosen successfully.

Tackle for pike-perch
During the period of greatest activity of this predatorit is best to use brighter baits. At the end of summer and autumn, silicones of yellow and red colors work well. But in spring and summer, lures of natural colors are more suitable: white, silvery, and also muffled pink and green.

Wobblers

Catching a pike perch on a branch lead with a wobbler is also very effective. However, do not give preference to large models. It is best to use drowning wobblers, imitating fry.

Suspenders with lures withzero buoyancy, used for fishing in the water column. During this period, the pike perch is most active at night. Very often in search of prey, it comes to the surface of the water, and also comes to the shore.

Pull off the lead on the pike-perch

However, at night a pike perch on a branch leash with a wobbleror silicone is unlikely to occur. Still, the lack of visibility plays a significant role here. But a lodger or impregnated attractant (flavoring) porcelain does their job perfectly. These are the only night lures that can seduce zander.

Zywiec and foam rubber

Zhivtsa most often planted on a single hookfor the lips or nostrils, so that when posting it moves forward. You can also use a dead fish, but its effectiveness in comparison with the live one will be quite low.

Leashes for pike-perch

Foamy fish, having a certainodor, of course, are effective for night fishing, but for daytime fishing their use is not justified. The material does not allow the bait to sufficiently repeat the movements of live fish, so in the afternoon the pike-perch on such nozzles reacts rarely.

Spinning rod for fishing on a branch lead

Ловля судака с берега на спиннинг подразумевает casting a long distance. It is very rare to find this predator near the coastal zone. To cast was as accurate and distant as possible, regardless of the equipment used, a 2.5-3 meter rod will be required. This is the average length for spinning, but it will be enough for any fishing. The rods are fast or medium, the use of parabolic forms for catching pike perch is not justified. When vyvazhivanii, he rarely has serious resistance, and specimens weighing more than 5 kilograms are infrequent. The blank test should be 10-40 grams.

Spinning Postings

Fishing for pike perch is used inmainly for fishing in the cold season: early spring and late autumn. During this period the pikeperch is either too active, or practically does not get out of its cloister. For fishing to be successful, you can use such postings as:

  • uniform;
  • "stop and go" wire;
  • jig or stepped;
  • tweeting.

With the greatest activity of the predator is excellentsuitable even wiring. To do this, you need to cast and wait until the load sinks to the bottom, as indicated by the tip of the spinning. After this, you can begin to wind the line with uniform movements without pauses. It is important to feel the movement of the cargo on the bottom. With a faster movement of the spool, the bait will be in the water column.

The “stop and go” posting also involves catching inbottom space, but in contrast to the uniform here are pauses lasting two or three seconds. This option can be used with low zander activity.

Night pike perch on a leash

Step wiring or jig is considered the mosteffective for catching zander. It is used regardless of the season and the activity of the predator. The essence of the stepped wiring is that the bait is allowed to sink to the bottom, after which four or five sharp turns of the coil are made, during which the nozzle comes off the surface, bounces and falls again. Between these pull-ups they pause, the value of which is determined by the angler himself, but is no more than ten seconds.

When twitching jerk gear is notrotation of the spool, and a sharp movement of the spinning rod to the side or low-amplitude twitching of its tip. Such vibrations annoy and attract pikeperch. Most often, such a wiring is used to conquer the territory and search for places of predator parking. Good catch!

Liked:
0
Popular Posts
Spiritual development
Food
yup