Today, steel doors use a largepopularity due to their exceptional protective properties. They can be installed as an input for almost any room: an apartment, an entrance, a private house, commercial real estate, government offices. Information materials concerning such an important element, basically, contain recommendations on the choice of characteristics of doors and specific manufacturers.
But the installation of the purchased product is no less important,than his attentive choice. Knowing the peculiarities of this procedure, you can control the honest work of the master, be sure of its correctness, and in case of breakdown - exclude improper installation as a cause of the malfunction. To be engaged in this uneasy business should necessarily the master, very often the firms realizing doors, provide additional qualified services themselves.
Между дверной рамой и проемом должен быть зазор в 20 millimeters on each side, if after dismantling the old box the gap is less, then the doorway is artificially expanded. After that, the box and the super metal doors themselves are fixed using wooden wedges and checked by level. Next, the master carefully drills holes in the wall through the wells in the box. After checking the normal functioning of the structure, it is finally fixed by anchor bolts or pins.
Places of fastening from inside are masked by plasticplugs in the tone of the frame. Now the final stage of installation begins - the remaining gaps are densely filled with mounting foam or filled with a heater. After this, it is necessary to tighten the upper and lower bolt, install locks and accessories. To remove associated contaminants, it is sufficient to wipe the surface of the product with a soft cloth, if necessary using detergent.
At first glance, it seems that to produceInstallation can and independently, but this does not mean that everything will go as expected. Even the slightest mistake can lead to a gradual skewing of the structure, failure or incorrect functioning of the locks. In addition, the manufacturer has the right to refuse the customer in warranty service, if the doors were installed without the participation of a professional. Therefore, it is much more practical to entrust the work to a master who has extensive experience in assembling metal doors.
